APRS Track Direct

My position About ☰

reset

E24YPM-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E24YPM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1836274571	0 Pkt	0 Pkt	-62 dBm	13.29 V
1836274406	0 Pkt	0 Pkt	-65 dBm	13.29 V
1766177532	1 Pkt	0 Pkt	-57 dBm	13.41 V
1766176618	7 Pkt	0 Pkt	-57 dBm	13.41 V
1766175703	1 Pkt	0 Pkt	-56 dBm	13.43 V
1766174788	1 Pkt	1 Pkt	-54 dBm	13.43 V
1766173873	2 Pkt	2 Pkt	-55 dBm	13.43 V
1766172959	6 Pkt	1 Pkt	-54 dBm	13.43 V
1766172044	3 Pkt	0 Pkt	-54 dBm	13.43 V
1766171129	2 Pkt	0 Pkt	-54 dBm	13.43 V
1766170216	2 Pkt	2 Pkt	-54 dBm	13.43 V
1766169300	6 Pkt	0 Pkt	-55 dBm	13.43 V
1766168385	2 Pkt	0 Pkt	-54 dBm	13.43 V
1766167471	2 Pkt	0 Pkt	-54 dBm	13.43 V
1766166557	2 Pkt	2 Pkt	-55 dBm	13.43 V
1766165642	6 Pkt	1 Pkt	-54 dBm	13.43 V
1766164728	2 Pkt	0 Pkt	-57 dBm	13.43 V
1766163813	2 Pkt	0 Pkt	-54 dBm	13.43 V
1766162897	2 Pkt	3 Pkt	-55 dBm	13.43 V
1766161983	6 Pkt	1 Pkt	-55 dBm	13.43 V
1766161067	2 Pkt	0 Pkt	-55 dBm	13.43 V
1766160153	3 Pkt	0 Pkt	-55 dBm	13.43 V
1766159238	1 Pkt	6 Pkt	-54 dBm	13.43 V
1766158324	6 Pkt	1 Pkt	-53 dBm	13.43 V
1766157408	2 Pkt	0 Pkt	-54 dBm	13.35 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)