APRS Track Direct

My position About ☰

reset

YU0XKS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YU0XKS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	A5*
1836274411	12.38 Volt	50 Pkt	0 Pkt	89 Pcnt	0 None
1836274261	12.38 Volt	40 Pkt	0 Pkt	89 Pcnt	0 None
1774116699	12.38 Volt	30 Pkt	0 Pkt	83 Pcnt	0 None
1774116100	12.38 Volt	30 Pkt	0 Pkt	83 Pcnt	0 None
1774115500	12.38 Volt	30 Pkt	0 Pkt	82 Pcnt	0 None
1774114899	12.38 Volt	20 Pkt	0 Pkt	80 Pcnt	0 None
1774114300	12.38 Volt	20 Pkt	0 Pkt	80 Pcnt	0 None
1774113699	12.38 Volt	30 Pkt	0 Pkt	77 Pcnt	20000 None
1774113100	12.38 Volt	50 Pkt	20 Pkt	82 Pcnt	45283 None
1774112500	12.38 Volt	70 Pkt	40 Pkt	86 Pcnt	61428 None
1774111900	12.38 Volt	90 Pkt	60 Pkt	90 Pcnt	68131 None
1774111300	12.38 Volt	100 Pkt	70 Pkt	86 Pcnt	71962 None
1774110100	12.38 Volt	130 Pkt	100 Pkt	91 Pcnt	80597 None
1774109500	12.15 Volt	130 Pkt	100 Pkt	91 Pcnt	79562 None
1774108900	12.08 Volt	130 Pkt	100 Pkt	91 Pcnt	79411 None
1774108300	12.38 Volt	130 Pkt	100 Pkt	91 Pcnt	79562 None
1774107700	12.38 Volt	140 Pkt	110 Pkt	94 Pcnt	81690 None
1774107100	12.38 Volt	140 Pkt	110 Pkt	95 Pcnt	78911 None
1774106500	12.3 Volt	150 Pkt	100 Pkt	94 Pcnt	66883 None
1774105900	12.3 Volt	140 Pkt	80 Pkt	93 Pcnt	57142 None
1774105300	11.93 Volt	130 Pkt	60 Pkt	93 Pcnt	49618 None
1774104700	12.23 Volt	110 Pkt	40 Pkt	92 Pcnt	39823 None
1774104100	12.15 Volt	90 Pkt	20 Pkt	92 Pcnt	26595 None
1774103500	12.23 Volt	60 Pkt	0 Pkt	89 Pcnt	7692 None
1774102900	12.38 Volt	50 Pkt	0 Pkt	90 Pcnt	0 None

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)