APRS Track Direct

My position About ☰

reset

KC8RFE-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KC8RFE-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274425	14.03 Volt	720 Pkt	270 Pkt	67 Pcnt
1836273975	14.03 Volt	660 Pkt	250 Pkt	64 Pcnt
1765967027	14.03 Volt	60 Pkt	30 Pkt	15 Pcnt
1765965827	14.03 Volt	60 Pkt	30 Pkt	15 Pcnt
1765964627	14.03 Volt	130 Pkt	50 Pkt	22 Pcnt
1765963427	14.03 Volt	190 Pkt	80 Pkt	24 Pcnt
1765962227	14.03 Volt	270 Pkt	110 Pkt	29 Pcnt
1765961027	14.03 Volt	250 Pkt	100 Pkt	27 Pcnt
1765959827	14.03 Volt	210 Pkt	80 Pkt	23 Pcnt
1765958627	14.03 Volt	130 Pkt	50 Pkt	17 Pcnt
1765957427	14.03 Volt	90 Pkt	40 Pkt	16 Pcnt
1765956227	14.03 Volt	70 Pkt	30 Pkt	18 Pcnt
1765955027	14.03 Volt	60 Pkt	30 Pkt	19 Pcnt
1765953827	14.03 Volt	60 Pkt	30 Pkt	17 Pcnt
1765952627	14.03 Volt	60 Pkt	30 Pkt	17 Pcnt
1765951427	14.03 Volt	80 Pkt	40 Pkt	18 Pcnt
1765950227	14.03 Volt	120 Pkt	50 Pkt	22 Pcnt
1765949027	14.03 Volt	150 Pkt	60 Pkt	25 Pcnt
1765947827	14.03 Volt	130 Pkt	50 Pkt	25 Pcnt
1765946627	14.03 Volt	100 Pkt	40 Pkt	22 Pcnt
1765945427	14.03 Volt	110 Pkt	40 Pkt	24 Pcnt
1765944228	14.03 Volt	130 Pkt	50 Pkt	23 Pcnt
1765943028	14.03 Volt	150 Pkt	50 Pkt	26 Pcnt
1765941828	14.03 Volt	160 Pkt	60 Pkt	25 Pcnt
1765940628	14.03 Volt	160 Pkt	60 Pkt	26 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)