This is the latest recevied telemetry packets stored in our database for station/object PU5SUP-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1766238381 | 0 | 0 | 26 | 32 | 137 |
| 1766236514 | 0 | 0 | 26 | 24 | 137 |
| 1766233744 | 0 | 0 | 25 | 25 | 137 |
| 1766232820 | 0 | 0 | 25 | 23 | 137 |
| 1766231901 | 0 | 0 | 24 | 21 | 136 |
| 1766230982 | 0 | 0 | 24 | 23 | 137 |
| 1766228211 | 0 | 0 | 23 | 24 | 137 |
| 1766227288 | 0 | 0 | 23 | 27 | 137 |
| 1766225428 | 0 | 0 | 23 | 25 | 137 |
| 1766224501 | 0 | 0 | 22 | 22 | 137 |
| 1766221759 | 0 | 0 | 22 | 15 | 137 |
| 1766219929 | 0 | 0 | 21 | 16 | 137 |
| 1766218101 | 0 | 0 | 21 | 12 | 137 |
| 1766217189 | 0 | 0 | 20 | 12 | 137 |
| 1766216282 | 0 | 0 | 20 | 16 | 137 |
| 1766215367 | 0 | 0 | 20 | 10 | 137 |
| 1766213554 | 0 | 0 | 19 | 11 | 137 |
| 1766212646 | 0 | 0 | 19 | 13 | 137 |
| 1766211738 | 0 | 0 | 19 | 15 | 137 |
| 1766210824 | 0 | 0 | 19 | 20 | 137 |
| 1766209000 | 0 | 0 | 18 | 22 | 137 |
| 1766208083 | 0 | 0 | 18 | 16 | 137 |
| 1766207172 | 0 | 0 | 18 | 16 | 137 |
| 1766206298 | 0 | 0 | 18 | 13 | 137 |
| 1766205744 | 0 | 0 | 17 | 18 | 137 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)