APRS Track Direct

My position About ☰

reset

IQ3GO-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ3GO-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	Temp*	Vin*
1836274700	247 Pkt	1690 Pkt	4 Pkt	11.75 °	13.5 Volt
1836274550	229 Pkt	1630 Pkt	5 Pkt	11.68 °	13.5 Volt
1836274400	251 Pkt	1710 Pkt	2 Pkt	11.75 °	13.5 Volt
1836274250	229 Pkt	1680 Pkt	8 Pkt	11.75 °	13.5 Volt
1836274100	250 Pkt	1730 Pkt	1 Pkt	11.75 °	13.5 Volt
1774099505	202 Pkt	1280 Pkt	1 Pkt	10.63 °	13.5 Volt
1774099205	227 Pkt	1280 Pkt	1 Pkt	10.63 °	13.5 Volt
1774098905	221 Pkt	1300 Pkt	1 Pkt	10.63 °	13.5 Volt
1774098605	164 Pkt	1270 Pkt	1 Pkt	10.63 °	13.5 Volt
1774098305	185 Pkt	1280 Pkt	1 Pkt	10.63 °	13.5 Volt
1774098005	191 Pkt	1330 Pkt	1 Pkt	10.63 °	13.5 Volt
1774097705	189 Pkt	1330 Pkt	1 Pkt	10.63 °	13.5 Volt
1774097405	205 Pkt	1360 Pkt	1 Pkt	10.63 °	13.5 Volt
1774097105	195 Pkt	1380 Pkt	1 Pkt	10.63 °	13.5 Volt
1774096805	182 Pkt	1380 Pkt	1 Pkt	10.63 °	13.5 Volt
1774096505	194 Pkt	1380 Pkt	1 Pkt	10.63 °	13.5 Volt
1774096205	219 Pkt	1410 Pkt	1 Pkt	10.63 °	13.5 Volt
1774095905	225 Pkt	1420 Pkt	1 Pkt	10.63 °	13.5 Volt
1774095605	210 Pkt	1410 Pkt	1 Pkt	10.63 °	13.5 Volt
1774095305	200 Pkt	1400 Pkt	0 Pkt	10.63 °	13.5 Volt
1774095005	222 Pkt	1400 Pkt	0 Pkt	10.63 °	13.5 Volt
1774094705	231 Pkt	1430 Pkt	1 Pkt	10.63 °	13.5 Volt
1774094405	221 Pkt	1400 Pkt	1 Pkt	10.63 °	13.5 Volt
1774094105	223 Pkt	1410 Pkt	1 Pkt	10.63 °	13.5 Volt
1774093805	226 Pkt	1400 Pkt	1 Pkt	10.63 °	13.5 Volt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

Temp: 0, 0.066, 0

Vin: 0, 0.075, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)