This is the latest recevied telemetry packets stored in our database for station/object CN8UN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1786744221 | 12.3 Volt | 120 Pkt | 10 Pkt | 69 Pcnt | 0 None |
| 1786743920 | 12.3 Volt | 100 Pkt | 10 Pkt | 62 Pcnt | 0 None |
| 1786743621 | 12.3 Volt | 80 Pkt | 10 Pkt | 57 Pcnt | 0 None |
| 1786743321 | 12.3 Volt | 70 Pkt | 10 Pkt | 52 Pcnt | 0 None |
| 1786743021 | 12.3 Volt | 70 Pkt | 10 Pkt | 52 Pcnt | 0 None |
| 1786742721 | 12.3 Volt | 70 Pkt | 10 Pkt | 51 Pcnt | 0 None |
| 1786742425 | 12.3 Volt | 70 Pkt | 10 Pkt | 52 Pcnt | 0 None |
| 1786742424 | 12.3 Volt | 70 Pkt | 10 Pkt | 52 Pcnt | 0 None |
| 1786742124 | 12.3 Volt | 60 Pkt | 10 Pkt | 50 Pcnt | 0 None |
| 1786741821 | 12.3 Volt | 60 Pkt | 10 Pkt | 48 Pcnt | 0 None |
| 1786741521 | 12.3 Volt | 60 Pkt | 10 Pkt | 45 Pcnt | 0 None |
| 1786741221 | 12.3 Volt | 50 Pkt | 10 Pkt | 40 Pcnt | 0 None |
| 1786740921 | 12.3 Volt | 40 Pkt | 0 Pkt | 32 Pcnt | 0 None |
| 1786740625 | 12.3 Volt | 40 Pkt | 0 Pkt | 27 Pcnt | 0 None |
| 1786740321 | 12.3 Volt | 40 Pkt | 0 Pkt | 28 Pcnt | 0 None |
| 1786740022 | 12.3 Volt | 50 Pkt | 0 Pkt | 30 Pcnt | 0 None |
| 1786740021 | 12.3 Volt | 50 Pkt | 0 Pkt | 30 Pcnt | 0 None |
| 1786739721 | 12.3 Volt | 60 Pkt | 0 Pkt | 31 Pcnt | 0 None |
| 1786739421 | 12.3 Volt | 60 Pkt | 0 Pkt | 31 Pcnt | 0 None |
| 1786739122 | 12.3 Volt | 70 Pkt | 0 Pkt | 30 Pcnt | 0 None |
| 1786738824 | 12.38 Volt | 80 Pkt | 0 Pkt | 30 Pcnt | 0 None |
| 1786738822 | 12.38 Volt | 80 Pkt | 0 Pkt | 30 Pcnt | 0 None |
| 1786738520 | 12.3 Volt | 100 Pkt | 0 Pkt | 32 Pcnt | 0 None |
| 1786738222 | 12.3 Volt | 120 Pkt | 10 Pkt | 38 Pcnt | 0 None |
| 1786737621 | 12.3 Volt | 160 Pkt | 20 Pkt | 45 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)