APRS Track Direct

My position About ☰

reset

OE3TEC-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3TEC-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rweek*	Rmonth*	Ryear*	dewp*
1836274818	6.28 mm	51.81 mm	376.32 mm	9 C
1836274210	6.28 mm	51.81 mm	376.32 mm	10 C
1766256288	1.57 mm	14.13 mm	478.24 mm	2 C
1766255681	1.57 mm	14.13 mm	478.24 mm	2 C
1766255072	1.57 mm	14.13 mm	478.24 mm	2 C
1766254465	1.57 mm	14.13 mm	478.24 mm	2 C
1766253858	1.57 mm	14.13 mm	478.24 mm	2 C
1766253251	1.57 mm	14.13 mm	478.24 mm	2 C
1766252644	1.57 mm	14.13 mm	478.24 mm	2 C
1766252037	1.57 mm	14.13 mm	478.24 mm	2 C
1766251430	1.57 mm	14.13 mm	478.24 mm	2 C
1766250822	1.57 mm	14.13 mm	478.24 mm	2 C
1766250216	1.57 mm	14.13 mm	478.24 mm	2 C
1766249608	1.57 mm	14.13 mm	478.24 mm	2 C
1766249000	1.57 mm	14.13 mm	478.24 mm	2 C
1766248393	1.57 mm	14.13 mm	478.24 mm	2 C
1766247786	1.57 mm	14.13 mm	478.24 mm	2 C
1766247179	1.57 mm	14.13 mm	478.24 mm	2 C
1766246570	1.57 mm	14.13 mm	478.24 mm	2 C
1766245963	1.57 mm	14.13 mm	478.24 mm	2 C
1766245357	1.57 mm	14.13 mm	478.24 mm	2 C
1766244751	1.57 mm	14.13 mm	478.24 mm	2 C
1766244143	1.57 mm	14.13 mm	478.24 mm	2 C
1766243536	1.57 mm	14.13 mm	478.24 mm	2 C
1766242929	1.57 mm	14.13 mm	478.24 mm	2 C

*Used Equation Coefficients:

Rweek: 0, 1.57, 0

Rmonth: 0, 1.57, 0

Ryear: 0, 7.84, 0

Rrate: 0, 1, 0

dewp: 0, 1, -127

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)