APRS Track Direct

My position About ☰

reset

IR1BK Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR1BK. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	DgR*	Eff*
1758244444	63 Pkt	390 Pkt	0.16 Pcnt	59 Pcnt
1758244144	70 Pkt	390 Pkt	0.16 Pcnt	59 Pcnt
1758243843	65 Pkt	380 Pkt	0.16 Pcnt	59 Pcnt
1758243543	52 Pkt	380 Pkt	0.16 Pcnt	59 Pcnt
1758243244	48 Pkt	380 Pkt	0.16 Pcnt	59 Pcnt
1758242942	57 Pkt	390 Pkt	0.16 Pcnt	59 Pcnt
1758242642	46 Pkt	390 Pkt	0.16 Pcnt	59 Pcnt
1758242342	47 Pkt	400 Pkt	0.16 Pcnt	59 Pcnt
1758242042	63 Pkt	430 Pkt	0.16 Pcnt	59 Pcnt
1758241741	82 Pkt	450 Pkt	0.16 Pcnt	59 Pcnt
1758241441	66 Pkt	470 Pkt	0.16 Pcnt	59 Pcnt
1758241141	56 Pkt	470 Pkt	0.16 Pcnt	59 Pcnt
1758240840	60 Pkt	490 Pkt	0.16 Pcnt	59 Pcnt
1758240540	59 Pkt	510 Pkt	0.16 Pcnt	59 Pcnt
1758240240	59 Pkt	520 Pkt	0.16 Pcnt	59 Pcnt
1758239939	67 Pkt	520 Pkt	0.16 Pcnt	59 Pcnt
1758239639	65 Pkt	530 Pkt	0.16 Pcnt	59 Pcnt
1758239339	69 Pkt	530 Pkt	0.16 Pcnt	59 Pcnt
1758239039	77 Pkt	510 Pkt	0.16 Pcnt	59 Pcnt
1758238738	81 Pkt	500 Pkt	0.16 Pcnt	59 Pcnt
1758238438	102 Pkt	490 Pkt	0.16 Pcnt	59 Pcnt
1758238138	100 Pkt	460 Pkt	0.16 Pcnt	59 Pcnt
1758237837	86 Pkt	410 Pkt	0.16 Pcnt	59 Pcnt
1758237537	92 Pkt	390 Pkt	0.16 Pcnt	59 Pcnt
1758237237	81 Pkt	350 Pkt	0.16 Pcnt	59 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)