This is the latest recevied telemetry packets stored in our database for station/object VA2AIG-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vbat* | Ibat* | Text* | Pres* | Humd* |
|---|---|---|---|---|---|
| 1758236113 | - | - | - | - | - |
| 1758235819 | 3.26 Volt | 0 ma | 20.9 C | 98620 Pa | 59 % |
| 1758235273 | - | - | - | - | - |
| 1758235219 | 3.26 Volt | 0 ma | 20.9 C | 98600 Pa | 59 % |
| 1758234619 | 3.27 Volt | 0 ma | 21 C | 98600 Pa | 59 % |
| 1758233473 | - | - | - | - | - |
| 1758233419 | 3.27 Volt | 0 ma | 21.1 C | 98580 Pa | 59 % |
| 1758232513 | - | - | - | - | - |
| 1758232219 | 3.26 Volt | 0 ma | 21 C | 98580 Pa | 59 % |
| 1758231673 | - | - | - | - | - |
| 1758231619 | 3.26 Volt | 0 ma | 21 C | 98580 Pa | 59 % |
| 1758231019 | 3.26 Volt | 0 ma | 21 C | 98580 Pa | 59 % |
| 1758229873 | - | - | - | - | - |
| 1758229819 | 3.26 Volt | 0 ma | 21.1 C | 98560 Pa | 58 % |
| 1758228913 | - | - | - | - | - |
| 1758228619 | 3.26 Volt | 0 ma | 21.2 C | 98560 Pa | 57 % |
| 1758228074 | - | - | - | - | - |
| 1758228019 | 3.27 Volt | 0 ma | 21.5 C | 98560 Pa | 58 % |
| 1758227419 | 3.26 Volt | 0 ma | 21.1 C | 98540 Pa | 58 % |
| 1758225853 | - | - | - | - | - |
| 1758225602 | 3.26 Volt | 0 ma | 21.1 C | 98540 Pa | 59 % |
| 1758225013 | - | - | - | - | - |
| 1758224999 | 3.26 Volt | 0 ma | 21.1 C | 98540 Pa | 59 % |
| 1758224406 | 3.26 Volt | 0 ma | 21.1 C | 98540 Pa | 59 % |
| 1758223213 | - | - | - | - | - |
*Used Equation Coefficients:
Vbat: 0, 0.01, 0
Ibat: 0, 1, -2000
Text: 0, 0.1, -50
Pres: 0, 20, 0
Humd: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)