APRS Track Direct

My position About ☰

reset

W6SCR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W6SCR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	SARBatt*	Solar*	Temp*	Rx1h*
1790640563	13.8 Volt	0.2 Volt	20.6 Volt	64.4 Deg	470 Pkt
1790639362	13.8 Volt	0.2 Volt	20.6 Volt	63.5 Deg	490 Pkt
1790638161	13.8 Volt	0.2 Volt	20.7 Volt	62.6 Deg	470 Pkt
1790636960	13.8 Volt	0.2 Volt	20.7 Volt	62.6 Deg	470 Pkt
1790635759	13.88 Volt	0.2 Volt	20.7 Volt	61.7 Deg	460 Pkt
1790634558	13.88 Volt	0.2 Volt	20.6 Volt	60.8 Deg	520 Pkt
1790633357	13.88 Volt	0.2 Volt	20.4 Volt	59.9 Deg	500 Pkt
1790632155	13.88 Volt	0.2 Volt	20.4 Volt	59 Deg	490 Pkt
1790630954	13.88 Volt	0.2 Volt	20.4 Volt	59 Deg	500 Pkt
1790629753	14.7 Volt	0.2 Volt	20 Volt	58.1 Deg	540 Pkt
1790628552	14.7 Volt	0.2 Volt	20.1 Volt	58.1 Deg	540 Pkt
1790627351	14.7 Volt	0.2 Volt	20 Volt	57.2 Deg	510 Pkt
1790626149	14.78 Volt	0.2 Volt	20.4 Volt	57.2 Deg	520 Pkt
1790624948	14.78 Volt	0.2 Volt	20 Volt	57.2 Deg	530 Pkt
1790623748	14.4 Volt	0.2 Volt	19.7 Volt	56.3 Deg	520 Pkt
1790622546	13.73 Volt	0.2 Volt	19.7 Volt	55.4 Deg	510 Pkt
1790621345	14.78 Volt	0.2 Volt	19.8 Volt	55.4 Deg	540 Pkt
1790620144	14.33 Volt	0.2 Volt	19.7 Volt	55.4 Deg	560 Pkt
1790618943	14.63 Volt	0.2 Volt	19.7 Volt	54.5 Deg	560 Pkt
1790617741	14.78 Volt	0.2 Volt	19.9 Volt	54.5 Deg	560 Pkt
1790616541	14.78 Volt	0.2 Volt	19.9 Volt	53.6 Deg	570 Pkt
1790615339	14.4 Volt	0.2 Volt	19.7 Volt	53.6 Deg	600 Pkt
1790614138	13.8 Volt	0.2 Volt	19.7 Volt	53.6 Deg	580 Pkt
1790612937	13.73 Volt	0.2 Volt	19.7 Volt	53.6 Deg	580 Pkt
1790611736	13.5 Volt	0.2 Volt	19.6 Volt	52.7 Deg	550 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

SARBatt: 0, 0.1, 0.2

Solar: 0, 0.1, 0.2

Temp: 0, 0.9, -83.2

Rx1h: 0, 10, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)