This is the latest recevied telemetry packets stored in our database for station/object DB0II-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1744109838 | 17.8 deg C | 43.2 % | 1025.8 hPa | 0 | 0 |
| 1744108937 | 17.7 deg C | 43.1 % | 1025.9 hPa | 0 | 0 |
| 1744108038 | 17.3 deg C | 43.9 % | 1025.9 hPa | 0 | 0 |
| 1744107137 | 17.6 deg C | 38.6 % | 1026 hPa | 0 | 0 |
| 1744106237 | 17.2 deg C | 42.6 % | 1026.2 hPa | 0 | 0 |
| 1744105337 | 17.9 deg C | 39.7 % | 1026.3 hPa | 0 | 0 |
| 1744104437 | 16.8 deg C | 46.3 % | 1026.3 hPa | 0 | 0 |
| 1744103537 | 15.3 deg C | 43.3 % | 1026.5 hPa | 0 | 0 |
| 1744102636 | 15.1 deg C | 44 % | 1026.5 hPa | 0 | 0 |
| 1744101736 | 14.8 deg C | 47 % | 1026.4 hPa | 0 | 0 |
| 1744100836 | 13.8 deg C | 50.3 % | 1026.3 hPa | 0 | 0 |
| 1744099936 | 13.1 deg C | 47.1 % | 1026.4 hPa | 0 | 0 |
| 1744099036 | 13.7 deg C | 48.1 % | 1026.2 hPa | 0 | 0 |
| 1744098136 | 14.4 deg C | 49 % | 1026 hPa | 0 | 0 |
| 1744097236 | 10.7 deg C | 52 % | 1026 hPa | 0 | 0 |
| 1744096336 | 12.3 deg C | 51.1 % | 1025.9 hPa | 0 | 0 |
| 1744095436 | 13.8 deg C | 50 % | 1025.8 hPa | 0 | 0 |
| 1744094535 | 13.5 deg C | 49.4 % | 1025.7 hPa | 0 | 0 |
| 1744093635 | 13.7 deg C | 50 % | 1025.7 hPa | 0 | 0 |
| 1744092735 | 13.3 deg C | 50.9 % | 1025.7 hPa | 0 | 0 |
| 1744091835 | 13.1 deg C | 51.2 % | 1025.7 hPa | 0 | 0 |
| 1744090935 | 13 deg C | 51.4 % | 1025.5 hPa | 0 | 0 |
| 1744090035 | 12.9 deg C | 51.6 % | 1025.3 hPa | 0 | 0 |
| 1744089135 | 12.8 deg C | 51.9 % | 1025.1 hPa | 0 | 0 |
| 1744088235 | 12.9 deg C | 51.8 % | 1025 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)