This is the latest recevied telemetry packets stored in our database for station/object SN0PEK-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Vsolar* | SunElev* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1763730448 | -0.02 degC | 0 Volts | 14.46 deg | 0 | 0 |
| 1763730231 | -0.02 degC | 0 Volts | 14.84 deg | 0 | 0 |
| 1763729971 | -0.02 degC | 0 Volts | 15.28 deg | 0 | 0 |
| 1763729759 | -0.02 degC | 0 Volts | 15.62 deg | 0 | 0 |
| 1763729496 | -0.02 degC | 0 Volts | 16.06 deg | 0 | 0 |
| 1763729167 | -0.02 degC | 0 Volts | 16.56 deg | 0 | 0 |
| 1763729120 | -0.02 degC | 0 Volts | 16.63 deg | 0 | 0 |
| 1763729050 | -0.02 degC | 0 Volts | 16.75 deg | 0 | 0 |
| 1763729009 | -0.02 degC | 0 Volts | 16.81 deg | 0 | 0 |
| 1763728948 | -0.02 degC | 0 Volts | 16.91 deg | 0 | 0 |
| 1763728832 | -0.02 degC | 0 Volts | 17.07 deg | 0 | 0 |
| 1763728547 | -0.02 degC | 0 Volts | 17.5 deg | 0 | 0 |
| 1763728128 | -0.02 degC | 0 Volts | 18.1 deg | 0 | 0 |
| 1763727854 | -0.02 degC | 0 Volts | 18.45 deg | 0 | 0 |
| 1763727593 | -0.02 degC | 0 Volts | 18.82 deg | 0 | 0 |
| 1763727550 | -0.02 degC | 0 Volts | 18.85 deg | 0 | 0 |
| 1763727488 | -0.02 degC | 0 Volts | 18.95 deg | 0 | 0 |
| 1763727429 | -0.02 degC | 0 Volts | 19.01 deg | 0 | 0 |
| 1763727387 | -0.02 degC | 0 Volts | 19.07 deg | 0 | 0 |
| 1763727327 | -0.02 degC | 0 Volts | 19.14 deg | 0 | 0 |
| 1763727282 | -0.02 degC | 0 Volts | 19.2 deg | 0 | 0 |
| 1763727247 | -0.02 degC | 0 Volts | 19.23 deg | 0 | 0 |
| 1763727208 | -0.02 degC | 0 Volts | 19.29 deg | 0 | 0 |
| 1763726916 | -0.02 degC | 0 Volts | 19.64 deg | 0 | 0 |
| 1763726885 | -0.02 degC | 0 Volts | 19.67 deg | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.43, -80
Vsolar: 0, 0.1, 0
SunElev: 0, 0.3137, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)