APRS Track Direct

My position About ☰

reset

VK2GJ-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2GJ-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vbat*	Psys*	Temp*	AirP*
1754190800	3.98 V	150 mW	28.7 degC	100500 Pa
1754190271	3.98 V	110 mW	24.3 degC	100500 Pa
1754189908	3.97 V	102 mW	24.2 degC	100512.5 Pa
1754189549	3.97 V	112 mW	24.5 degC	100512.5 Pa
1754189213	3.97 V	98 mW	23.6 degC	100525 Pa
1754188827	3.98 V	106 mW	24.2 degC	100512.5 Pa
1754188462	3.98 V	102 mW	23.5 degC	100512.5 Pa
1754188124	3.98 V	106 mW	25.3 degC	100500 Pa
1754187745	3.97 V	108 mW	24.2 degC	100500 Pa
1754187387	3.98 V	100 mW	24.2 degC	100512.5 Pa
1754187018	3.98 V	106 mW	24.1 degC	100525 Pa
1754186665	3.98 V	98 mW	24.3 degC	100525 Pa
1754186304	3.98 V	108 mW	24.3 degC	100525 Pa
1754185941	3.98 V	102 mW	24 degC	100537.5 Pa
1754185599	3.98 V	124 mW	25.3 degC	100537.5 Pa
1754185268	3.98 V	102 mW	24.3 degC	100562.5 Pa
1754184871	3.98 V	110 mW	24.8 degC	100550 Pa
1754184499	3.98 V	108 mW	23.6 degC	100562.5 Pa
1754184129	3.98 V	96 mW	23.5 degC	100562.5 Pa
1754183791	3.98 V	114 mW	24.7 degC	100575 Pa
1754183425	3.98 V	100 mW	24.1 degC	100575 Pa
1754183053	3.98 V	110 mW	23.6 degC	100587.5 Pa
1754182702	3.98 V	102 mW	24.1 degC	100587.5 Pa
1754182333	3.98 V	110 mW	23.7 degC	100587.5 Pa
1754181986	3.98 V	102 mW	24 degC	100587.5 Pa

*Used Equation Coefficients:

Vbat: 0, 0.001, 0

Vsol: 0, 0.001, 0

Psys: 0, 2, 0

Temp: 0, 0.1, -100

AirP: 0, 12.5, 500

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)