This is the latest recevied telemetry packets stored in our database for station/object VK3RAW-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1744818968 | 42 | 121 | 42 | 14 | 31 |
| 1744815369 | 43 | 121 | 40 | 13 | 31 |
| 1744813569 | 43 | 120 | 47 | 13 | 1 |
| 1744808169 | 44 | 121 | 39 | 11 | 31 |
| 1744806369 | 44 | 121 | 43 | 11 | 1 |
| 1744804569 | 45 | 121 | 41 | 10 | 31 |
| 1744802769 | 46 | 121 | 35 | 10 | 1 |
| 1744800968 | 46 | 120 | 41 | 9 | 31 |
| 1744799168 | 47 | 121 | 47 | 9 | 1 |
| 1744797368 | 48 | 121 | 43 | 8 | 31 |
| 1744795569 | 50 | 121 | 63 | 8 | 1 |
| 1744793770 | 51 | 121 | 56 | 7 | 31 |
| 1744791968 | 53 | 122 | 49 | 7 | 1 |
| 1744790168 | 55 | 122 | 45 | 6 | 31 |
| 1744786568 | 56 | 121 | 45 | 5 | 31 |
| 1744784768 | 56 | 122 | 43 | 5 | 1 |
| 1744782968 | 56 | 122 | 28 | 4 | 31 |
| 1744781168 | 56 | 122 | 24 | 4 | 1 |
| 1744777568 | 56 | 122 | 61 | 3 | 1 |
| 1744775769 | 56 | 122 | 53 | 2 | 31 |
| 1744773967 | 56 | 122 | 41 | 2 | 1 |
| 1744772168 | 56 | 122 | 57 | 1 | 31 |
| 1744770368 | 55 | 122 | 67 | 1 | 1 |
| 1744768568 | 54 | 122 | 82 | 0 | 31 |
| 1744766767 | 52 | 122 | 57 | 0 | 1 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)