This is the latest recevied telemetry packets stored in our database for station/object APRSIS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Avg 10m* | Avg 10m* | RxPkts* | IGateDropRx* | TxPkts* |
---|---|---|---|---|---|
1719847418 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719846218 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719845018 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719843818 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719842618 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719841418 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719840219 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719839018 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719837818 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719836618 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719835418 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719834218 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719833018 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719831818 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719830618 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719829418 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719828218 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719827018 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719825818 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719824618 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719823418 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719822218 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719821018 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719819818 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
1719818618 | 0 Rx Erlang | 0 Tx Erlang | 0 count/10m | 0 count/10m | 0 count/10m |
*Used Equation Coefficients:
Avg 10m: 0, 0.005, 0
Avg 10m: 0, 0.005, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)