This is the latest recevied telemetry packets stored in our database for station/object UB0JBX-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274459 | 5 | 8 | 53 | 90 | 0 |
| 1762332361 | 5 | 7 | 51 | 85 | 0 |
| 1762331462 | 5 | 7 | 51 | 89 | 0 |
| 1762330562 | 6 | 7 | 51 | 89 | 0 |
| 1762329662 | 6 | 7 | 51 | 88 | 0 |
| 1762328762 | 5 | 7 | 51 | 77 | 0 |
| 1762327862 | 5 | 7 | 51 | 88 | 0 |
| 1762326962 | 5 | 7 | 51 | 79 | 0 |
| 1762326061 | 6 | 7 | 51 | 79 | 0 |
| 1762325162 | 6 | 7 | 51 | 82 | 0 |
| 1762324262 | 5 | 7 | 51 | 79 | 0 |
| 1762323362 | 5 | 7 | 51 | 90 | 0 |
| 1762322461 | 6 | 7 | 51 | 90 | 0 |
| 1762321561 | 6 | 7 | 51 | 88 | 0 |
| 1762320662 | 5 | 7 | 52 | 84 | 0 |
| 1762319762 | 5 | 7 | 51 | 81 | 0 |
| 1762318862 | 6 | 7 | 51 | 83 | 0 |
| 1762317961 | 6 | 7 | 51 | 71 | 0 |
| 1762317062 | 6 | 7 | 51 | 80 | 0 |
| 1762316162 | 5 | 7 | 51 | 80 | 0 |
| 1762315262 | 5 | 7 | 51 | 91 | 0 |
| 1762314361 | 6 | 7 | 51 | 91 | 0 |
| 1762313462 | 6 | 7 | 51 | 91 | 0 |
| 1762312562 | 5 | 7 | 51 | 75 | 0 |
| 1762311662 | 5 | 7 | 51 | 77 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)