This is the latest recevied telemetry packets stored in our database for station/object DK1TN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750146943 | 21.1 deg C | 34.2 % | 0 | 0 | 0 |
| 1750146043 | 21.1 deg C | 34.4 % | 0 | 0 | 0 |
| 1750145143 | 21.1 deg C | 34.6 % | 0 | 0 | 0 |
| 1750144243 | 21 deg C | 34.6 % | 0 | 0 | 0 |
| 1750143342 | 21 deg C | 34.6 % | 0 | 0 | 0 |
| 1750142442 | 21 deg C | 34.6 % | 0 | 0 | 0 |
| 1750142113 | 21 deg C | 34.5 % | 0 | 0 | 0 |
| 1750141213 | 20.9 deg C | 34.5 % | 0 | 0 | 0 |
| 1750140312 | 20.8 deg C | 34.4 % | 0 | 0 | 0 |
| 1750139412 | 20.8 deg C | 34.4 % | 0 | 0 | 0 |
| 1750138512 | 20.8 deg C | 34.4 % | 0 | 0 | 0 |
| 1750137612 | 20.7 deg C | 34.3 % | 0 | 0 | 0 |
| 1750136712 | 20.8 deg C | 34.3 % | 0 | 0 | 0 |
| 1750135812 | 20.8 deg C | 34.4 % | 0 | 0 | 0 |
| 1750134912 | 20.9 deg C | 34.4 % | 0 | 0 | 0 |
| 1750134012 | 21 deg C | 34.7 % | 0 | 0 | 0 |
| 1750133112 | 21.2 deg C | 35.4 % | 0 | 0 | 0 |
| 1750132212 | 21 deg C | 35.6 % | 0 | 0 | 0 |
| 1750131312 | 20.8 deg C | 35.2 % | 0 | 0 | 0 |
| 1750130412 | 20.6 deg C | 34.8 % | 0 | 0 | 0 |
| 1750130095 | 20.6 deg C | 34.5 % | 0 | 0 | 0 |
| 1750129195 | 20.5 deg C | 34.1 % | 0 | 0 | 0 |
| 1750128295 | 20.6 deg C | 34.2 % | 0 | 0 | 0 |
| 1750127395 | 20.6 deg C | 34.3 % | 0 | 0 | 0 |
| 1750126495 | 20.7 deg C | 34.5 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)