APRS Track Direct

My position About ☰

reset

TA1SY-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA1SY-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1754000458	2 Pkt	0 Pkt	0 Pkt	-76 dBm	13.17 V
1753999599	83 Pkt	0 Pkt	2 Pkt	-74 dBm	13.17 V
1753998675	65 Pkt	0 Pkt	2 Pkt	-74 dBm	13.17 V
1753997751	32 Pkt	0 Pkt	0 Pkt	-74 dBm	13.15 V
1753996828	3 Pkt	0 Pkt	0 Pkt	-73 dBm	13.15 V
1753991342	62 Pkt	0 Pkt	0 Pkt	-72 dBm	13.15 V
1753990418	64 Pkt	3 Pkt	2 Pkt	-70 dBm	13.15 V
1753989495	66 Pkt	0 Pkt	0 Pkt	-77 dBm	13.15 V
1753988571	73 Pkt	0 Pkt	0 Pkt	-78 dBm	13.17 V
1753987647	72 Pkt	0 Pkt	0 Pkt	-71 dBm	13.17 V
1753986724	51 Pkt	1 Pkt	1 Pkt	-75 dBm	13.15 V
1753985800	29 Pkt	0 Pkt	0 Pkt	-78 dBm	13.17 V
1753984877	38 Pkt	0 Pkt	0 Pkt	-74 dBm	13.15 V
1753983954	81 Pkt	0 Pkt	1 Pkt	-78 dBm	13.15 V
1753983030	8 Pkt	0 Pkt	0 Pkt	-75 dBm	13.15 V
1753982623	84 Pkt	0 Pkt	0 Pkt	-76 dBm	13.15 V
1753981699	32 Pkt	0 Pkt	0 Pkt	-75 dBm	13.17 V
1753980777	32 Pkt	0 Pkt	1 Pkt	-74 dBm	13.15 V
1753979854	34 Pkt	0 Pkt	1 Pkt	-75 dBm	13.15 V
1753978937	44 Pkt	0 Pkt	1 Pkt	-77 dBm	13.15 V
1753978008	38 Pkt	0 Pkt	0 Pkt	-71 dBm	13.17 V
1753977086	2 Pkt	0 Pkt	0 Pkt	-79 dBm	13.15 V
1753976739	33 Pkt	0 Pkt	0 Pkt	-73 dBm	13.15 V
1753975817	27 Pkt	0 Pkt	0 Pkt	-80 dBm	13.15 V
1753974894	35 Pkt	0 Pkt	0 Pkt	-71 dBm	13.13 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)