This is the latest recevied telemetry packets stored in our database for station/object SP6RJ-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1836274305 | 773 Count | 9 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1836274155 | 779 Count | 9 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1762291979 | 482 Count | 0 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1762291379 | 479 Count | 0 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1762290778 | 471 Count | 0 Count | 0 Count | 4.35 VDC | 0 VDC |
| 1762290178 | 468 Count | 0 Count | 0 Count | 4.24 VDC | 0 VDC |
| 1762289577 | 461 Count | 0 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1762288988 | 454 Count | 0 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1762288388 | 450 Count | 0 Count | 0 Count | 4.2 VDC | 0 VDC |
| 1762287788 | 446 Count | 0 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1762287187 | 439 Count | 0 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1762286587 | 433 Count | 0 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1762285987 | 431 Count | 0 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1762285386 | 425 Count | 0 Count | 0 Count | 4.31 VDC | 0 VDC |
| 1762284789 | 420 Count | 0 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1762284185 | 417 Count | 0 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1762283584 | 409 Count | 0 Count | 0 Count | 4.25 VDC | 0 VDC |
| 1762282983 | 406 Count | 0 Count | 0 Count | 4.28 VDC | 0 VDC |
| 1762282383 | 397 Count | 0 Count | 0 Count | 4.34 VDC | 0 VDC |
| 1762281782 | 393 Count | 0 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1762281182 | 388 Count | 0 Count | 0 Count | 4.3 VDC | 0 VDC |
| 1762280581 | 381 Count | 0 Count | 0 Count | 4.29 VDC | 0 VDC |
| 1762279981 | 375 Count | 0 Count | 0 Count | 4.32 VDC | 0 VDC |
| 1762279381 | 368 Count | 0 Count | 0 Count | 4.33 VDC | 0 VDC |
| 1762278781 | 365 Count | 0 Count | 0 Count | 4.35 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)