APRS Track Direct

My position About ☰

reset

HS5SQI-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5SQI-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1836274549	0 Pkt	0 Pkt	0 Pkt	-43 dBm	11.85 V
1836274421	0 Pkt	0 Pkt	0 Pkt	-41 dBm	11.83 V
1836273927	0 Pkt	0 Pkt	0 Pkt	-41 dBm	11.83 V
1774160276	7 Pkt	0 Pkt	0 Pkt	-75 dBm	14.52 V
1774159654	9 Pkt	0 Pkt	1 Pkt	-75 dBm	14.89 V
1774159031	8 Pkt	0 Pkt	0 Pkt	-75 dBm	13.56 V
1774158409	7 Pkt	0 Pkt	0 Pkt	-76 dBm	13.35 V
1774157787	12 Pkt	0 Pkt	0 Pkt	-76 dBm	13.88 V
1774157163	13 Pkt	0 Pkt	0 Pkt	-76 dBm	13.66 V
1774156541	5 Pkt	0 Pkt	1 Pkt	-79 dBm	13.97 V
1774155919	4 Pkt	1 Pkt	0 Pkt	-77 dBm	14.07 V
1774155297	12 Pkt	1 Pkt	0 Pkt	-78 dBm	14.48 V
1774154674	5 Pkt	0 Pkt	1 Pkt	-79 dBm	14.19 V
1774154051	6 Pkt	0 Pkt	1 Pkt	-78 dBm	14.42 V
1774153429	5 Pkt	0 Pkt	0 Pkt	-78 dBm	13.86 V
1774152807	11 Pkt	1 Pkt	0 Pkt	-77 dBm	14.68 V
1774152185	11 Pkt	0 Pkt	0 Pkt	-79 dBm	13.68 V
1774151562	10 Pkt	0 Pkt	0 Pkt	-77 dBm	13.56 V
1774150939	7 Pkt	0 Pkt	0 Pkt	-79 dBm	13.9 V
1774150317	9 Pkt	1 Pkt	0 Pkt	-79 dBm	14.46 V
1774149694	11 Pkt	0 Pkt	0 Pkt	-80 dBm	13.37 V
1774149072	6 Pkt	1 Pkt	0 Pkt	-79 dBm	13.23 V
1774148450	11 Pkt	0 Pkt	0 Pkt	-79 dBm	13.62 V
1774147827	7 Pkt	0 Pkt	1 Pkt	-78 dBm	13.43 V
1774147205	7 Pkt	0 Pkt	0 Pkt	-78 dBm	14.54 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)