APRS Track Direct

My position About ☰

reset

BM5GSV-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BM5GSV-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*	DiGi*
1778021938	37.5 C	19 p	86 p	999 p	880 p
1778021318	38.9 C	17 p	101 p	999 p	882 p
1778020689	37.5 C	24 p	136 p	999 p	879 p
1778020085	38.5 C	39 p	149 p	999 p	881 p
1778019485	37.5 C	44 p	161 p	999 p	877 p
1778018868	38.5 C	44 p	141 p	999 p	864 p
1778018229	38.9 C	72 p	129 p	999 p	846 p
1778017619	38.5 C	70 p	117 p	999 p	834 p
1778016989	37.5 C	43 p	77 p	999 p	801 p
1778016368	38 C	26 p	62 p	999 p	788 p
1778015756	38.5 C	19 p	54 p	999 p	785 p
1778015108	38 C	17 p	54 p	999 p	782 p
1778014478	38.5 C	15 p	53 p	999 p	782 p
1778013848	38.9 C	20 p	53 p	999 p	781 p
1778013218	38.9 C	18 p	50 p	999 p	782 p
1778012588	40.4 C	15 p	54 p	999 p	784 p
1778011958	39.4 C	16 p	56 p	999 p	785 p
1778011328	38 C	15 p	59 p	999 p	786 p
1778010698	38.9 C	16 p	68 p	999 p	789 p
1778010068	38.5 C	21 p	66 p	999 p	786 p
1778009448	38.5 C	23 p	68 p	999 p	784 p
1778008808	38 C	26 p	62 p	999 p	780 p
1778008189	38.5 C	30 p	62 p	999 p	777 p
1778007558	38.9 C	20 p	50 p	999 p	768 p
1778006948	37.5 C	15 p	47 p	999 p	770 p

*Used Equation Coefficients:

CPUTemp: 0, 0.1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)