APRS Track Direct

My position About ☰

reset

LZ0DAP-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LZ0DAP-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin:*	Rx1h*	EffTo*	Temp*
1836274290	14.32 Volt	170 Pkt	88 Pcnt	26.61 C
1836274140	14.32 Volt	170 Pkt	88 Pcnt	26.75 C
1774101123	14.32 Volt	70 Pkt	88 Pcnt	24.4 C
1774100523	14.32 Volt	70 Pkt	88 Pcnt	24.4 C
1774099923	14.32 Volt	70 Pkt	88 Pcnt	24.4 C
1774099323	14.32 Volt	70 Pkt	88 Pcnt	23.81 C
1774098723	14.32 Volt	70 Pkt	88 Pcnt	23.96 C
1774098123	14.32 Volt	70 Pkt	88 Pcnt	24.11 C
1774097523	14.32 Volt	70 Pkt	88 Pcnt	24.11 C
1774096923	14.32 Volt	70 Pkt	88 Pcnt	23.96 C
1774096323	14.32 Volt	70 Pkt	88 Pcnt	24.11 C
1774095723	14.32 Volt	70 Pkt	88 Pcnt	24.11 C
1774095123	14.32 Volt	70 Pkt	88 Pcnt	24.11 C
1774094523	14.32 Volt	60 Pkt	88 Pcnt	24.11 C
1774093924	14.32 Volt	70 Pkt	88 Pcnt	23.96 C
1774093324	14.32 Volt	70 Pkt	88 Pcnt	23.96 C
1774092724	14.32 Volt	60 Pkt	88 Pcnt	23.96 C
1774092124	14.32 Volt	60 Pkt	88 Pcnt	23.96 C
1774091524	14.32 Volt	60 Pkt	88 Pcnt	23.96 C
1774090924	14.32 Volt	60 Pkt	88 Pcnt	23.96 C
1774090324	14.32 Volt	60 Pkt	88 Pcnt	24.11 C
1774089724	14.32 Volt	60 Pkt	88 Pcnt	23.96 C
1774089124	14.32 Volt	60 Pkt	88 Pcnt	24.11 C
1774088524	14.32 Volt	60 Pkt	88 Pcnt	23.96 C
1774087924	14.32 Volt	60 Pkt	88 Pcnt	23.96 C

*Used Equation Coefficients:

Vin:: 0, 0.077, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

EffTo: 0, 1, 0

Temp: 0, 0.147, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)