APRS Track Direct

My position About ☰

reset

VK2RZ-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK2RZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	FreeM*	RxP*	TxP*
1732568919	0.87 Load	14707 Mb	1456 Pkt	886 Pkt
1732568319	0.93 Load	14719 Mb	1443 Pkt	674 Pkt
1732567719	0.99 Load	14718 Mb	1498 Pkt	1070 Pkt
1732567119	0.89 Load	14707 Mb	1557 Pkt	1143 Pkt
1732566519	0.92 Load	14705 Mb	1292 Pkt	471 Pkt
1732565918	0.94 Load	14711 Mb	1347 Pkt	989 Pkt
1732565318	0.96 Load	14738 Mb	1448 Pkt	965 Pkt
1732564719	0.89 Load	14734 Mb	1264 Pkt	472 Pkt
1732564119	0.92 Load	14740 Mb	1290 Pkt	820 Pkt
1732563519	0.95 Load	14756 Mb	1130 Pkt	745 Pkt
1732562919	0.91 Load	14743 Mb	1231 Pkt	508 Pkt
1732562319	0.89 Load	14738 Mb	1152 Pkt	803 Pkt
1732561719	0.94 Load	14739 Mb	1446 Pkt	1008 Pkt
1732561118	1 Load	14742 Mb	1211 Pkt	473 Pkt
1732560518	0.97 Load	14743 Mb	1255 Pkt	777 Pkt
1732559918	0.95 Load	14742 Mb	1160 Pkt	795 Pkt
1732559318	0.85 Load	14738 Mb	1253 Pkt	511 Pkt
1732558719	0.93 Load	14733 Mb	1229 Pkt	800 Pkt
1732558119	0.86 Load	14750 Mb	1291 Pkt	778 Pkt
1732557519	0.93 Load	14727 Mb	1461 Pkt	648 Pkt
1732556919	0.93 Load	14745 Mb	1284 Pkt	776 Pkt
1732556319	0.95 Load	14755 Mb	1107 Pkt	783 Pkt
1732555719	0.93 Load	14739 Mb	1336 Pkt	537 Pkt
1732555118	0.93 Load	14756 Mb	1262 Pkt	927 Pkt
1732554518	0.95 Load	14739 Mb	1264 Pkt	778 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)