APRS Track Direct

My position About ☰

reset

HS4YQG-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS4YQG-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1758158396	8 ug/m3	11 ug/m3	12 ug/m3	-34 dBm	15.01 V
1758157771	10 ug/m3	14 ug/m3	16 ug/m3	-36 dBm	14.93 V
1758157147	7 ug/m3	10 ug/m3	11 ug/m3	-36 dBm	14.89 V
1758156522	9 ug/m3	13 ug/m3	13 ug/m3	-36 dBm	15.07 V
1758155898	8 ug/m3	11 ug/m3	11 ug/m3	-36 dBm	14.87 V
1758155273	9 ug/m3	12 ug/m3	14 ug/m3	-37 dBm	14.93 V
1758154649	9 ug/m3	11 ug/m3	11 ug/m3	-37 dBm	14.97 V
1758154025	9 ug/m3	14 ug/m3	15 ug/m3	-36 dBm	14.95 V
1758153401	9 ug/m3	13 ug/m3	13 ug/m3	-36 dBm	14.95 V
1758152777	8 ug/m3	11 ug/m3	12 ug/m3	-35 dBm	14.91 V
1758152153	5 ug/m3	7 ug/m3	7 ug/m3	-35 dBm	14.77 V
1758151529	6 ug/m3	8 ug/m3	11 ug/m3	-35 dBm	14.85 V
1758150905	5 ug/m3	9 ug/m3	9 ug/m3	-37 dBm	14.79 V
1758150281	5 ug/m3	8 ug/m3	8 ug/m3	-35 dBm	14.64 V
1758149657	4 ug/m3	6 ug/m3	6 ug/m3	-34 dBm	14.56 V
1758149033	4 ug/m3	6 ug/m3	6 ug/m3	-35 dBm	14.64 V
1758148409	5 ug/m3	7 ug/m3	7 ug/m3	-35 dBm	14.81 V
1758147785	6 ug/m3	8 ug/m3	8 ug/m3	-36 dBm	14.7 V
1758147161	6 ug/m3	9 ug/m3	9 ug/m3	-35 dBm	14.93 V
1758146537	6 ug/m3	8 ug/m3	11 ug/m3	-35 dBm	14.91 V
1758145913	5 ug/m3	8 ug/m3	8 ug/m3	-35 dBm	14.97 V
1758145289	5 ug/m3	8 ug/m3	8 ug/m3	-36 dBm	14.91 V
1758144665	5 ug/m3	9 ug/m3	10 ug/m3	-36 dBm	15.07 V
1758144041	5 ug/m3	8 ug/m3	8 ug/m3	-36 dBm	15.05 V
1758143416	5 ug/m3	9 ug/m3	9 ug/m3	-36 dBm	14.97 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)