APRS Track Direct

My position About ☰

reset

LY1BWB-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LY1BWB-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1786730260	14.03 Volt	110 Pkt	50 Pkt	33 Pcnt
1786730259	14.03 Volt	110 Pkt	50 Pkt	33 Pcnt
1786729959	14.03 Volt	90 Pkt	40 Pkt	29 Pcnt
1786729659	14.03 Volt	70 Pkt	40 Pkt	27 Pcnt
1786729359	14.03 Volt	70 Pkt	30 Pkt	25 Pcnt
1786729060	14.03 Volt	60 Pkt	30 Pkt	24 Pcnt
1786729059	14.03 Volt	60 Pkt	30 Pkt	24 Pcnt
1786728759	14.03 Volt	50 Pkt	20 Pkt	20 Pcnt
1786728459	14.03 Volt	40 Pkt	20 Pkt	18 Pcnt
1786728159	14.03 Volt	30 Pkt	20 Pkt	16 Pcnt
1786727860	14.03 Volt	10 Pkt	0 Pkt	5 Pcnt
1786727859	14.03 Volt	10 Pkt	0 Pkt	5 Pcnt
1786727559	14.03 Volt	0 Pkt	0 Pkt	2 Pcnt
1786727259	14.03 Volt	0 Pkt	0 Pkt	2 Pcnt
1786726959	14.03 Volt	0 Pkt	0 Pkt	2 Pcnt
1786726660	14.03 Volt	0 Pkt	0 Pkt	2 Pcnt
1786726659	14.03 Volt	0 Pkt	0 Pkt	2 Pcnt
1786726359	14.03 Volt	0 Pkt	0 Pkt	4 Pcnt
1786726059	14.03 Volt	0 Pkt	0 Pkt	3 Pcnt
1786725759	14.03 Volt	0 Pkt	0 Pkt	3 Pcnt
1786725460	14.03 Volt	0 Pkt	0 Pkt	2 Pcnt
1786725459	14.03 Volt	0 Pkt	0 Pkt	2 Pcnt
1786725159	14.03 Volt	0 Pkt	0 Pkt	2 Pcnt
1786724859	14.03 Volt	0 Pkt	0 Pkt	2 Pcnt
1786724559	14.03 Volt	0 Pkt	0 Pkt	3 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)