This is the latest recevied telemetry packets stored in our database for station/object EA5SW-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1836274210 | 0 Count | 391 Count | 0 Count | 0 VDC | 0 VDC |
| 1762281026 | 0 Count | 656 Count | 0 Count | 0 VDC | 0 VDC |
| 1762279225 | 0 Count | 656 Count | 0 Count | 0 VDC | 0 VDC |
| 1762277425 | 0 Count | 656 Count | 0 Count | 0 VDC | 0 VDC |
| 1762275625 | 0 Count | 656 Count | 0 Count | 0 VDC | 0 VDC |
| 1762273825 | 0 Count | 640 Count | 0 Count | 0 VDC | 0 VDC |
| 1762272025 | 0 Count | 617 Count | 0 Count | 0 VDC | 0 VDC |
| 1762270225 | 0 Count | 613 Count | 0 Count | 0 VDC | 0 VDC |
| 1762268425 | 0 Count | 596 Count | 0 Count | 0 VDC | 0 VDC |
| 1762266624 | 0 Count | 580 Count | 0 Count | 0 VDC | 0 VDC |
| 1762264826 | 0 Count | 501 Count | 0 Count | 0 VDC | 0 VDC |
| 1762263026 | 0 Count | 461 Count | 0 Count | 0 VDC | 0 VDC |
| 1762261226 | 0 Count | 461 Count | 0 Count | 0 VDC | 0 VDC |
| 1762259426 | 0 Count | 428 Count | 0 Count | 0 VDC | 0 VDC |
| 1762257626 | 0 Count | 428 Count | 0 Count | 0 VDC | 0 VDC |
| 1762255825 | 0 Count | 428 Count | 0 Count | 0 VDC | 0 VDC |
| 1762254025 | 0 Count | 428 Count | 0 Count | 0 VDC | 0 VDC |
| 1762252225 | 0 Count | 412 Count | 0 Count | 0 VDC | 0 VDC |
| 1762250425 | 0 Count | 374 Count | 0 Count | 0 VDC | 0 VDC |
| 1762248625 | 0 Count | 373 Count | 0 Count | 0 VDC | 0 VDC |
| 1762246825 | 0 Count | 372 Count | 0 Count | 0 VDC | 0 VDC |
| 1762245025 | 0 Count | 369 Count | 0 Count | 0 VDC | 0 VDC |
| 1762243225 | 0 Count | 368 Count | 0 Count | 0 VDC | 0 VDC |
| 1762241425 | 0 Count | 360 Count | 0 Count | 0 VDC | 0 VDC |
| 1762239625 | 0 Count | 358 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)