APRS Track Direct

My position About ☰

reset

VK4RGT-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RGT-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Voltage*	Rx1h*	DgR1h*	Eff1h*
1786735994	13.88 Volt	50 Pkt	21.43 Pcnt	69 Pcnt
1786735394	13.88 Volt	50 Pkt	19.3 Pcnt	67 Pcnt
1786734795	13.88 Volt	50 Pkt	21.57 Pcnt	62 Pcnt
1786734195	13.88 Volt	50 Pkt	18.97 Pcnt	63 Pcnt
1786733595	13.88 Volt	60 Pkt	17.46 Pcnt	63 Pcnt
1786732995	13.88 Volt	60 Pkt	18.46 Pcnt	68 Pcnt
1786731795	13.88 Volt	60 Pkt	18.03 Pcnt	78 Pcnt
1786730594	13.88 Volt	60 Pkt	17.46 Pcnt	87 Pcnt
1786729995	13.88 Volt	60 Pkt	15.94 Pcnt	88 Pcnt
1786728196	13.88 Volt	30 Pkt	25.64 Pcnt	84 Pcnt
1786727594	13.88 Volt	30 Pkt	32.26 Pcnt	81 Pcnt
1786726995	13.88 Volt	20 Pkt	47.62 Pcnt	67 Pcnt
1786726394	13.88 Volt	10 Pkt	90.91 Pcnt	57 Pcnt
1786725195	13.88 Volt	10 Pkt	90.91 Pcnt	47 Pcnt
1786724594	13.88 Volt	10 Pkt	90 Pcnt	40 Pcnt
1786723994	13.88 Volt	10 Pkt	75 Pcnt	35 Pcnt
1786723395	13.88 Volt	10 Pkt	69.23 Pcnt	32 Pcnt
1786722794	13.88 Volt	10 Pkt	56.25 Pcnt	30 Pcnt
1786722196	13.88 Volt	10 Pkt	56.25 Pcnt	27 Pcnt
1786721595	13.88 Volt	20 Pkt	38.46 Pcnt	33 Pcnt
1786720994	13.88 Volt	30 Pkt	36.67 Pcnt	35 Pcnt
1786720395	13.88 Volt	30 Pkt	35.48 Pcnt	38 Pcnt
1786719794	13.88 Volt	30 Pkt	31.43 Pcnt	41 Pcnt
1786719194	13.88 Volt	30 Pkt	30.56 Pcnt	45 Pcnt
1786718594	13.88 Volt	40 Pkt	26.67 Pcnt	53 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Voltage: 0, 0.075, 0

Rx1h: 0, 10, 0

DgR1h: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)