APRS Track Direct

My position About ☰

reset

OH5RBG-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OH5RBG-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1836274633	0.71 Load	25 DegC	453 Mb	335 Pkt	337 Pkt
1836274483	0.36 Load	25 DegC	442 Mb	285 Pkt	289 Pkt
1836274333	0.33 Load	25 DegC	313 Mb	307 Pkt	308 Pkt
1836274183	0.4 Load	25 DegC	453 Mb	355 Pkt	356 Pkt
1836274033	0.36 Load	25 DegC	321 Mb	314 Pkt	315 Pkt
1762340696	1.04 Load	25 DegC	1178 Mb	365 Pkt	366 Pkt
1762340397	0.24 Load	25 DegC	1178 Mb	361 Pkt	362 Pkt
1762340096	0.2 Load	25 DegC	1187 Mb	393 Pkt	394 Pkt
1762339796	0.29 Load	25 DegC	1186 Mb	321 Pkt	322 Pkt
1762339497	0.27 Load	25 DegC	1189 Mb	301 Pkt	305 Pkt
1762339196	0.21 Load	25 DegC	1186 Mb	359 Pkt	360 Pkt
1762338897	0.21 Load	25 DegC	1182 Mb	365 Pkt	364 Pkt
1762338596	0.21 Load	25 DegC	1181 Mb	379 Pkt	381 Pkt
1762338297	0.2 Load	25 DegC	1181 Mb	337 Pkt	338 Pkt
1762337996	0.2 Load	25 DegC	1178 Mb	387 Pkt	388 Pkt
1762337697	0.23 Load	25 DegC	1180 Mb	355 Pkt	358 Pkt
1762337396	0.2 Load	25 DegC	1194 Mb	330 Pkt	332 Pkt
1762337097	0.24 Load	25 DegC	1198 Mb	364 Pkt	365 Pkt
1762336796	0.24 Load	25 DegC	1177 Mb	357 Pkt	358 Pkt
1762336497	0.2 Load	25 DegC	1176 Mb	368 Pkt	369 Pkt
1762336196	0.19 Load	25 DegC	1180 Mb	378 Pkt	379 Pkt
1762335897	0.24 Load	25 DegC	1176 Mb	304 Pkt	307 Pkt
1762335596	0.22 Load	25 DegC	1183 Mb	323 Pkt	324 Pkt
1762335297	0.29 Load	25 DegC	1186 Mb	408 Pkt	407 Pkt
1762334997	0.23 Load	25 DegC	1184 Mb	371 Pkt	372 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)