APRS Track Direct

My position About ☰

reset

IW1BPT-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IW1BPT-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rete*	Batt1*	Temp*	Hum*
1836274475	0 Volt	13.8 Volt	31 GrdC	38.5 %hum
1836274321	0 Volt	13.8 Volt	30.75 GrdC	38.5 %hum
1836273878	0 Volt	13.8 Volt	31 GrdC	38 %hum
1774111769	230 Volt	13.8 Volt	22.5 GrdC	29.5 %hum
1774111172	230 Volt	13.9 Volt	22.5 GrdC	29.5 %hum
1774110576	230 Volt	13.8 Volt	22.5 GrdC	29.5 %hum
1774109980	230 Volt	13.9 Volt	22.75 GrdC	30 %hum
1774109383	230 Volt	13.8 Volt	22.75 GrdC	30 %hum
1774108787	230 Volt	13.9 Volt	22.75 GrdC	30 %hum
1774108191	230 Volt	13.9 Volt	22.75 GrdC	30 %hum
1774107594	230 Volt	13.9 Volt	22.75 GrdC	30 %hum
1774106998	230 Volt	13.9 Volt	22.75 GrdC	30 %hum
1774106402	230 Volt	13.9 Volt	22.75 GrdC	30 %hum
1774105805	230 Volt	13.9 Volt	22.75 GrdC	30 %hum
1774105209	230 Volt	13.9 Volt	22.75 GrdC	30 %hum
1774104613	230 Volt	13.9 Volt	22.75 GrdC	30 %hum
1774104016	230 Volt	13.9 Volt	22.75 GrdC	30 %hum
1774103420	230 Volt	13.8 Volt	22.5 GrdC	30 %hum
1774102823	230 Volt	13.9 Volt	22.75 GrdC	30 %hum
1774102227	230 Volt	13.9 Volt	22.75 GrdC	30 %hum
1774101631	230 Volt	13.9 Volt	22.75 GrdC	30.5 %hum
1774101035	230 Volt	13.9 Volt	22.75 GrdC	30.5 %hum
1774100438	230 Volt	13.8 Volt	23 GrdC	30.5 %hum
1774099842	230 Volt	13.9 Volt	23 GrdC	31 %hum
1774099246	230 Volt	13.9 Volt	23 GrdC	31 %hum

*Used Equation Coefficients:

Rete: 0, 1, 0

Batt1: 0, 0.1, 0

Batt2: 0, 0.1, 0

Temp: 0, 0.25, -20.5

Hum: 0, 0.5, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)