APRS Track Direct

My position About ☰

reset

OH5RDD-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OH5RDD-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1836274783	0.21 Load	52.62 DegC	177 Mb	226 Pkt	139 Pkt
1836274483	0.27 Load	52.08 DegC	172 Mb	226 Pkt	141 Pkt
1836274333	0.24 Load	52.08 DegC	175 Mb	224 Pkt	139 Pkt
1836274183	0.24 Load	52.62 DegC	174 Mb	230 Pkt	143 Pkt
1836273883	0.29 Load	51.54 DegC	171 Mb	234 Pkt	146 Pkt
1762338109	0.2 Load	52.08 DegC	179 Mb	248 Pkt	142 Pkt
1762337809	0.25 Load	52.08 DegC	177 Mb	270 Pkt	141 Pkt
1762337509	0.2 Load	52.08 DegC	173 Mb	243 Pkt	140 Pkt
1762337209	0.22 Load	51.54 DegC	177 Mb	240 Pkt	140 Pkt
1762336909	0.27 Load	52.08 DegC	176 Mb	242 Pkt	135 Pkt
1762336609	0.21 Load	52.08 DegC	176 Mb	230 Pkt	133 Pkt
1762336309	0.27 Load	51.54 DegC	176 Mb	243 Pkt	133 Pkt
1762336009	0.29 Load	51.54 DegC	173 Mb	239 Pkt	141 Pkt
1762335709	0.3 Load	52.08 DegC	172 Mb	243 Pkt	137 Pkt
1762335409	0.27 Load	51.54 DegC	174 Mb	235 Pkt	134 Pkt
1762335109	0.31 Load	52.08 DegC	177 Mb	237 Pkt	134 Pkt
1762334810	0.22 Load	51.54 DegC	174 Mb	241 Pkt	138 Pkt
1762334509	0.23 Load	51.54 DegC	174 Mb	246 Pkt	138 Pkt
1762334210	0.25 Load	51.54 DegC	175 Mb	242 Pkt	140 Pkt
1762333909	0.21 Load	51.54 DegC	179 Mb	442 Pkt	134 Pkt
1762333609	0.24 Load	52.08 DegC	178 Mb	223 Pkt	136 Pkt
1762333309	0.29 Load	52.08 DegC	171 Mb	235 Pkt	142 Pkt
1762333010	0.26 Load	52.08 DegC	174 Mb	226 Pkt	139 Pkt
1762332709	0.34 Load	51.54 DegC	175 Mb	222 Pkt	133 Pkt
1762332409	0.24 Load	51.54 DegC	178 Mb	221 Pkt	135 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)