This is the latest recevied telemetry packets stored in our database for station/object N0SZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
|---|---|---|---|---|---|
| 1836274767 | 12.38 Volt | 540 Pkt | 130 Pkt | 75 Pcnt | 0 None |
| 1836274468 | 12.38 Volt | 540 Pkt | 130 Pkt | 73 Pcnt | 0 None |
| 1836274317 | 12.38 Volt | 560 Pkt | 140 Pkt | 75 Pcnt | 0 None |
| 1836274167 | 12.38 Volt | 550 Pkt | 130 Pkt | 74 Pcnt | 0 None |
| 1836273867 | 12.3 Volt | 560 Pkt | 130 Pkt | 74 Pcnt | 0 None |
| 1762329227 | 12.3 Volt | 80 Pkt | 20 Pkt | 19 Pcnt | 0 None |
| 1762328927 | 12.3 Volt | 80 Pkt | 20 Pkt | 20 Pcnt | 0 None |
| 1762328627 | 12.38 Volt | 80 Pkt | 20 Pkt | 20 Pcnt | 0 None |
| 1762328327 | 12.3 Volt | 80 Pkt | 20 Pkt | 20 Pcnt | 0 None |
| 1762328027 | 12.3 Volt | 80 Pkt | 20 Pkt | 19 Pcnt | 0 None |
| 1762327727 | 12.3 Volt | 70 Pkt | 20 Pkt | 17 Pcnt | 0 None |
| 1762327427 | 12.3 Volt | 70 Pkt | 20 Pkt | 19 Pcnt | 0 None |
| 1762327127 | 12.3 Volt | 70 Pkt | 20 Pkt | 19 Pcnt | 0 None |
| 1762326827 | 12.3 Volt | 60 Pkt | 20 Pkt | 18 Pcnt | 0 None |
| 1762326527 | 12.3 Volt | 60 Pkt | 20 Pkt | 18 Pcnt | 0 None |
| 1762326227 | 12.38 Volt | 70 Pkt | 20 Pkt | 18 Pcnt | 0 None |
| 1762325927 | 12.3 Volt | 60 Pkt | 20 Pkt | 18 Pcnt | 0 None |
| 1762325627 | 12.3 Volt | 70 Pkt | 20 Pkt | 19 Pcnt | 0 None |
| 1762325327 | 12.3 Volt | 70 Pkt | 20 Pkt | 19 Pcnt | 0 None |
| 1762325027 | 12.3 Volt | 70 Pkt | 20 Pkt | 20 Pcnt | 0 None |
| 1762324727 | 12.3 Volt | 80 Pkt | 20 Pkt | 20 Pcnt | 0 None |
| 1762324427 | 12.3 Volt | 80 Pkt | 30 Pkt | 21 Pcnt | 0 None |
| 1762324127 | 12.3 Volt | 80 Pkt | 30 Pkt | 20 Pcnt | 0 None |
| 1762323828 | 12.3 Volt | 80 Pkt | 30 Pkt | 19 Pcnt | 0 None |
| 1762323527 | 12.3 Volt | 80 Pkt | 30 Pkt | 20 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)