APRS Track Direct

My position About ☰

reset

N8TJD-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N8TJD-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1790636428	14.4 Volt	110 Pkt	80 Pkt	40 Pcnt
1790636426	14.4 Volt	110 Pkt	80 Pkt	40 Pcnt
1790636126	14.4 Volt	120 Pkt	80 Pkt	41 Pcnt
1790635828	14.4 Volt	120 Pkt	90 Pkt	41 Pcnt
1790635826	14.4 Volt	120 Pkt	90 Pkt	41 Pcnt
1790635526	14.4 Volt	120 Pkt	90 Pkt	42 Pcnt
1790635228	14.4 Volt	120 Pkt	90 Pkt	43 Pcnt
1790635226	14.4 Volt	120 Pkt	90 Pkt	43 Pcnt
1790634926	14.4 Volt	120 Pkt	90 Pkt	43 Pcnt
1790634628	14.4 Volt	120 Pkt	90 Pkt	41 Pcnt
1790634626	14.4 Volt	120 Pkt	90 Pkt	41 Pcnt
1790634326	14.4 Volt	130 Pkt	90 Pkt	43 Pcnt
1790634026	14.4 Volt	120 Pkt	90 Pkt	40 Pcnt
1790633726	14.25 Volt	110 Pkt	80 Pkt	38 Pcnt
1790633426	14.4 Volt	120 Pkt	90 Pkt	39 Pcnt
1790633126	14.4 Volt	120 Pkt	80 Pkt	40 Pcnt
1790632828	14.4 Volt	130 Pkt	90 Pkt	41 Pcnt
1790632826	14.4 Volt	130 Pkt	90 Pkt	41 Pcnt
1790632526	14.4 Volt	120 Pkt	90 Pkt	40 Pcnt
1790632228	14.4 Volt	120 Pkt	80 Pkt	39 Pcnt
1790632226	14.4 Volt	120 Pkt	80 Pkt	39 Pcnt
1790631926	14.4 Volt	110 Pkt	80 Pkt	37 Pcnt
1790631628	14.4 Volt	100 Pkt	70 Pkt	35 Pcnt
1790631626	14.4 Volt	100 Pkt	70 Pkt	35 Pcnt
1790631326	14.4 Volt	110 Pkt	70 Pkt	37 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)