This is the latest recevied telemetry packets stored in our database for station/object KD8NJV-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Battery* | Temp* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786744427 | 12.1 Volts | 110.8 Deg.F | 0 | 0 | 0 |
| 1786743528 | 12.07 Volts | 109.92 Deg.F | 0 | 0 | 0 |
| 1786742628 | 12.1 Volts | 109.04 Deg.F | 0 | 0 | 0 |
| 1786741729 | 12.13 Volts | 107.29 Deg.F | 0 | 0 | 0 |
| 1786740830 | 12.13 Volts | 106.41 Deg.F | 0 | 0 | 0 |
| 1786739930 | 12.13 Volts | 104.65 Deg.F | 0 | 0 | 0 |
| 1786739031 | 12.16 Volts | 103.77 Deg.F | 0 | 0 | 0 |
| 1786738132 | 12.16 Volts | 102.01 Deg.F | 0 | 0 | 0 |
| 1786737233 | 12.19 Volts | 101.13 Deg.F | 0 | 0 | 0 |
| 1786736334 | 12.31 Volts | 102.01 Deg.F | 0 | 0 | 0 |
| 1786735435 | 12.22 Volts | 98.5 Deg.F | 0 | 0 | 0 |
| 1786734536 | 12.25 Volts | 97.62 Deg.F | 0 | 0 | 0 |
| 1786733637 | 13.42 Volts | 96.74 Deg.F | 0 | 0 | 0 |
| 1786733627 | 13.42 Volts | 96.74 Deg.F | 0 | 0 | 0 |
| 1786733622 | 13.42 Volts | 96.74 Deg.F | 0 | 0 | 0 |
| 1786733600 | 13.42 Volts | 95.86 Deg.F | 0 | 0 | 0 |
| 1786733588 | 13.42 Volts | 95.86 Deg.F | 0 | 0 | 0 |
| 1786733584 | 13.39 Volts | 95.86 Deg.F | 0 | 0 | 0 |
| 1786733559 | 13.39 Volts | 95.86 Deg.F | 0 | 0 | 0 |
| 1786733125 | 13.45 Volts | 94.98 Deg.F | 0 | 0 | 0 |
| 1786732324 | 12.19 Volts | 94.1 Deg.F | 0 | 0 | 0 |
| 1786731425 | 13.86 Volts | 96.74 Deg.F | 0 | 0 | 0 |
| 1786731399 | 13.8 Volts | 96.74 Deg.F | 0 | 0 | 0 |
| 1786731342 | 13.8 Volts | 95.86 Deg.F | 0 | 0 | 0 |
| 1786731337 | 13.74 Volts | 95.86 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.0293, 0
Temp: 0, 0.879, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)