This is the latest recevied telemetry packets stored in our database for station/object IZ0FKE-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | CPU* | TMP* | RAM* | PNG* | Value5* |
|---|---|---|---|---|---|
| 1770102029 | 23.91 % | 59.5 C | 18.82 % | 22 ms | 0 |
| 1770101429 | 23.91 % | 60 C | 17.64 % | 22 ms | 0 |
| 1770100829 | 22.74 % | 60 C | 17.64 % | 22 ms | 0 |
| 1770100229 | 23.91 % | 60 C | 17.64 % | 22 ms | 0 |
| 1770099629 | 22.74 % | 59 C | 17.64 % | 22 ms | 0 |
| 1770099029 | 22.74 % | 59.5 C | 17.64 % | 22 ms | 0 |
| 1770098429 | 22.74 % | 59 C | 17.64 % | 23 ms | 0 |
| 1770097829 | 22.74 % | 59.5 C | 17.64 % | 22 ms | 0 |
| 1770097229 | 22.74 % | 59 C | 17.64 % | 22 ms | 0 |
| 1770096629 | 22.74 % | 59.5 C | 17.64 % | 22 ms | 0 |
| 1770096029 | 22.74 % | 59.5 C | 17.64 % | 22 ms | 0 |
| 1770095429 | 22.74 % | 59.5 C | 17.64 % | 22 ms | 0 |
| 1770094829 | 22.74 % | 59 C | 17.64 % | 22 ms | 0 |
| 1770094229 | 22.74 % | 59.5 C | 17.64 % | 22 ms | 0 |
| 1770093629 | 22.74 % | 59.5 C | 17.64 % | 22 ms | 0 |
| 1770093029 | 22.74 % | 59 C | 17.64 % | 22 ms | 0 |
| 1770092429 | 23.91 % | 60 C | 16.86 % | 22 ms | 0 |
| 1770091829 | 22.74 % | 59 C | 16.86 % | 22 ms | 0 |
| 1770091229 | 22.74 % | 59.5 C | 17.64 % | 22 ms | 0 |
| 1770090629 | 22.74 % | 59 C | 17.64 % | 22 ms | 0 |
| 1770090029 | 23.91 % | 59 C | 17.64 % | 22 ms | 0 |
| 1770089429 | 20.78 % | 59.5 C | 16.86 % | 22 ms | 0 |
| 1770088829 | 23.91 % | 60 C | 16.86 % | 22 ms | 0 |
| 1770088229 | 23.91 % | 59 C | 16.86 % | 22 ms | 0 |
| 1770087642 | 20.78 % | 58 C | 17.64 % | 22 ms | 0 |
*Used Equation Coefficients:
CPU: 0, 0.392, 0
TMP: 0, 0.5, 0
RAM: 0, 0.392, 0
PNG: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)