This is the latest recevied telemetry packets stored in our database for station/object HS5HBQ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
|---|---|---|---|---|---|
| 1790651278 | 56 Pkt | 0 Pkt | 0 Pkt | -29 dBm | 65 % |
| 1790650654 | 49 Pkt | 1 Pkt | 0 Pkt | -30 dBm | 64 % |
| 1790650030 | 52 Pkt | 3 Pkt | 0 Pkt | -34 dBm | 65 % |
| 1790649405 | 55 Pkt | 2 Pkt | 0 Pkt | -31 dBm | 65 % |
| 1790648781 | 57 Pkt | 0 Pkt | 0 Pkt | -32 dBm | 66 % |
| 1790648157 | 56 Pkt | 2 Pkt | 0 Pkt | -31 dBm | 65 % |
| 1790647532 | 49 Pkt | 0 Pkt | 0 Pkt | -31 dBm | 65 % |
| 1790646908 | 56 Pkt | 1 Pkt | 0 Pkt | -31 dBm | 65 % |
| 1790646284 | 55 Pkt | 0 Pkt | 0 Pkt | -42 dBm | 65 % |
| 1790645659 | 53 Pkt | 0 Pkt | 0 Pkt | -31 dBm | 65 % |
| 1790645037 | 49 Pkt | 2 Pkt | 0 Pkt | -31 dBm | 64 % |
| 1790644415 | 53 Pkt | 2 Pkt | 0 Pkt | -30 dBm | 64 % |
| 1790643787 | 62 Pkt | 0 Pkt | 0 Pkt | -32 dBm | 64 % |
| 1790643162 | 53 Pkt | 6 Pkt | 0 Pkt | -31 dBm | 63 % |
| 1790642537 | 59 Pkt | 0 Pkt | 0 Pkt | -31 dBm | 63 % |
| 1790641913 | 78 Pkt | 2 Pkt | 0 Pkt | -32 dBm | 63 % |
| 1790641286 | 70 Pkt | 3 Pkt | 0 Pkt | -31 dBm | 60 % |
| 1790640661 | 63 Pkt | 4 Pkt | 0 Pkt | -30 dBm | 56 % |
| 1790640034 | 60 Pkt | 1 Pkt | 0 Pkt | -31 dBm | 55 % |
| 1790639409 | 51 Pkt | 3 Pkt | 0 Pkt | -32 dBm | 51 % |
| 1790638784 | 53 Pkt | 0 Pkt | 0 Pkt | -30 dBm | 45 % |
| 1790638160 | 55 Pkt | 8 Pkt | 0 Pkt | -31 dBm | 32 % |
| 1790637536 | 55 Pkt | 0 Pkt | 0 Pkt | -31 dBm | 13 % |
| 1790636912 | 49 Pkt | 0 Pkt | 0 Pkt | -32 dBm | 6 % |
| 1790636287 | 56 Pkt | 1 Pkt | 0 Pkt | -34 dBm | 0 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)