APRS Track Direct

My position About ☰

reset

YM4KFE-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM4KFE-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1758208807	35 Pkt	11 Pkt	-58 dBm	13.92 V
1758206970	23 Pkt	11 Pkt	-53 dBm	13.92 V
1758205132	21 Pkt	11 Pkt	-57 dBm	13.92 V
1758203292	29 Pkt	12 Pkt	-56 dBm	13.92 V
1758201450	20 Pkt	11 Pkt	-58 dBm	13.92 V
1758199613	16 Pkt	12 Pkt	-57 dBm	13.95 V
1758197773	16 Pkt	12 Pkt	-59 dBm	13.92 V
1758195934	22 Pkt	10 Pkt	-59 dBm	13.92 V
1758194099	22 Pkt	10 Pkt	-57 dBm	13.95 V
1758192260	22 Pkt	12 Pkt	-58 dBm	13.92 V
1758190422	18 Pkt	11 Pkt	-57 dBm	13.95 V
1758188582	32 Pkt	11 Pkt	-58 dBm	13.92 V
1758186743	22 Pkt	11 Pkt	-57 dBm	13.95 V
1758184907	23 Pkt	11 Pkt	-60 dBm	13.95 V
1758183070	19 Pkt	12 Pkt	-62 dBm	13.95 V
1758181232	24 Pkt	13 Pkt	-60 dBm	13.92 V
1758179392	14 Pkt	14 Pkt	-55 dBm	13.95 V
1758177552	10 Pkt	16 Pkt	-57 dBm	13.95 V
1758175712	25 Pkt	15 Pkt	-55 dBm	13.92 V
1758173869	18 Pkt	14 Pkt	-58 dBm	13.92 V
1758172031	26 Pkt	16 Pkt	-58 dBm	13.92 V
1758170187	36 Pkt	13 Pkt	-59 dBm	13.95 V
1758168346	25 Pkt	11 Pkt	-57 dBm	13.95 V
1758166507	19 Pkt	11 Pkt	-57 dBm	13.92 V
1758164668	30 Pkt	12 Pkt	-56 dBm	13.92 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)