APRS Track Direct

My position About ☰

reset

M1NER-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object M1NER-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1749328980	0.31 Load	45.08 DegC	50 Mb	1379 Pkt	255 Pkt
1749328680	0.33 Load	45.08 DegC	46 Mb	1382 Pkt	279 Pkt
1749328380	0.3 Load	45.62 DegC	52 Mb	1873 Pkt	284 Pkt
1749328080	0.25 Load	45.08 DegC	39 Mb	1384 Pkt	280 Pkt
1749327780	0.24 Load	45.08 DegC	54 Mb	1429 Pkt	270 Pkt
1749327480	0.27 Load	45.08 DegC	52 Mb	2010 Pkt	261 Pkt
1749327180	0.29 Load	45.62 DegC	48 Mb	1333 Pkt	248 Pkt
1749326880	0.26 Load	46.16 DegC	52 Mb	1380 Pkt	270 Pkt
1749326580	0.26 Load	45.08 DegC	50 Mb	1866 Pkt	259 Pkt
1749326280	0.26 Load	45.08 DegC	41 Mb	1321 Pkt	245 Pkt
1749325980	0.28 Load	45.08 DegC	57 Mb	1476 Pkt	288 Pkt
1749325680	0.25 Load	44.55 DegC	55 Mb	1866 Pkt	264 Pkt
1749325380	0.28 Load	45.08 DegC	52 Mb	1429 Pkt	241 Pkt
1749325080	0.27 Load	45.08 DegC	58 Mb	1580 Pkt	276 Pkt
1749324781	0.3 Load	45.08 DegC	58 Mb	1947 Pkt	291 Pkt
1749324480	0.25 Load	45.62 DegC	39 Mb	1458 Pkt	260 Pkt
1749324180	0.26 Load	45.08 DegC	54 Mb	1375 Pkt	266 Pkt
1749323880	0.25 Load	45.62 DegC	39 Mb	1904 Pkt	269 Pkt
1749323580	0.28 Load	45.08 DegC	50 Mb	1385 Pkt	265 Pkt
1749323280	0.27 Load	45.62 DegC	38 Mb	1375 Pkt	251 Pkt
1749322980	0.29 Load	46.16 DegC	51 Mb	1902 Pkt	292 Pkt
1749322680	0.26 Load	45.62 DegC	49 Mb	1373 Pkt	266 Pkt
1749322380	0.27 Load	45.08 DegC	49 Mb	1411 Pkt	272 Pkt
1749322079	0.3 Load	45.62 DegC	53 Mb	1866 Pkt	267 Pkt
1749321780	0.26 Load	46.16 DegC	53 Mb	1373 Pkt	278 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)