This is the latest recevied telemetry packets stored in our database for station/object DK1DD-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1770113771 | 2 deg C | 79.2 % | 999.3 hPa | 0 | 0 |
| 1770112871 | 1.8 deg C | 80.1 % | 1000.5 hPa | 0 | 0 |
| 1770111971 | 1.3 deg C | 80.5 % | 1000.7 hPa | 0 | 0 |
| 1770111071 | 1.2 deg C | 81.7 % | 1000.2 hPa | 0 | 0 |
| 1770110173 | 0.6 deg C | 83.2 % | 1000.3 hPa | 0 | 0 |
| 1770109271 | 0.3 deg C | 84.2 % | 1000.8 hPa | 0 | 0 |
| 1770108797 | 0.2 deg C | 84.4 % | 1000.7 hPa | 0 | 0 |
| 1770107803 | -0.1 deg C | 85.3 % | 999.9 hPa | 0 | 0 |
| 1770107470 | -0.2 deg C | 85.8 % | 1000.4 hPa | 0 | 0 |
| 1770106570 | -0.5 deg C | 86.7 % | 1000.8 hPa | 0 | 0 |
| 1770105670 | -0.9 deg C | 87.3 % | 1000.4 hPa | 0 | 0 |
| 1770104770 | -1.1 deg C | 88.1 % | 999.2 hPa | 0 | 0 |
| 1770103870 | -1.3 deg C | 88.7 % | 1001.3 hPa | 0 | 0 |
| 1770102969 | -1.4 deg C | 89.4 % | 999.9 hPa | 0 | 0 |
| 1770102069 | -1.5 deg C | 89.8 % | 1000.1 hPa | 0 | 0 |
| 1770101169 | -1.6 deg C | 90.2 % | 1001.1 hPa | 0 | 0 |
| 1770100269 | -1.8 deg C | 90.4 % | 1000.7 hPa | 0 | 0 |
| 1770099369 | -1.9 deg C | 90.8 % | 1000.3 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)