APRS Track Direct

My position About ☰

reset

INDIAN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object INDIAN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx1h*	Rx10m*	Eff1h*	Temp*	Vin*
1836274799	780 Pkt	100 Pkt	89 Pcnt	65.5 F	13.65 Volt
1836274499	800 Pkt	107 Pkt	90 Pcnt	65.5 F	13.65 Volt
1836274349	770 Pkt	109 Pkt	89 Pcnt	65.5 F	13.65 Volt
1836274199	810 Pkt	116 Pkt	90 Pcnt	65.5 F	13.65 Volt
1836273899	810 Pkt	121 Pkt	89 Pcnt	65.5 F	13.65 Volt
1774151767	740 Pkt	123 Pkt	77 Pcnt	45.7 F	13.35 Volt
1774151467	730 Pkt	126 Pkt	76 Pcnt	45.7 F	13.35 Volt
1774151167	730 Pkt	123 Pkt	75 Pcnt	45.7 F	13.35 Volt
1774150867	720 Pkt	104 Pkt	75 Pcnt	45.7 F	13.35 Volt
1774150567	740 Pkt	111 Pkt	75 Pcnt	45.7 F	13.35 Volt
1774150267	740 Pkt	119 Pkt	75 Pcnt	46.6 F	13.35 Volt
1774149967	750 Pkt	107 Pkt	74 Pcnt	46.6 F	13.35 Volt
1774149667	760 Pkt	122 Pkt	75 Pcnt	46.6 F	13.43 Volt
1774149367	770 Pkt	127 Pkt	76 Pcnt	46.6 F	13.35 Volt
1774149067	760 Pkt	104 Pkt	75 Pcnt	46.6 F	13.35 Volt
1774148773	770 Pkt	105 Pkt	76 Pcnt	46.6 F	13.43 Volt
1774148467	760 Pkt	101 Pkt	76 Pcnt	46.6 F	13.43 Volt
1774148167	770 Pkt	106 Pkt	76 Pcnt	46.6 F	13.43 Volt
1774147867	780 Pkt	119 Pkt	77 Pcnt	46.6 F	13.43 Volt
1774147567	780 Pkt	140 Pkt	78 Pcnt	46.6 F	13.43 Volt
1774147267	780 Pkt	119 Pkt	79 Pcnt	46.6 F	13.43 Volt
1774146967	780 Pkt	127 Pkt	80 Pcnt	46.6 F	13.43 Volt
1774146667	780 Pkt	133 Pkt	81 Pcnt	46.6 F	13.43 Volt
1774146367	780 Pkt	125 Pkt	82 Pcnt	47.5 F	13.43 Volt
1774146067	770 Pkt	131 Pkt	82 Pcnt	47.5 F	13.43 Volt

*Used Equation Coefficients:

Rx1h: 0, 10, 0

Rx10m: 0, 1, 0

Eff1h: 0, 1, 0

Temp: 0, 0.9, -83

Vin: 0, 0.075, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)