APRS Track Direct

My position About ☰

reset

9A7KXP-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A7KXP-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Dg10m*
1836274510	13.32 Volt	880 Pkt	300 Pkt	58 Pcnt	50 Pkt
1836273909	13.32 Volt	910 Pkt	300 Pkt	59 Pcnt	43 Pkt
1762319729	13.32 Volt	960 Pkt	230 Pkt	57 Pcnt	41 Pkt
1762318526	13.32 Volt	1060 Pkt	250 Pkt	61 Pcnt	40 Pkt
1762317926	13.32 Volt	1100 Pkt	260 Pkt	62 Pcnt	34 Pkt
1762317326	13.32 Volt	1130 Pkt	270 Pkt	63 Pcnt	41 Pkt
1762316728	13.32 Volt	1170 Pkt	260 Pkt	65 Pcnt	50 Pkt
1762316125	13.32 Volt	1190 Pkt	270 Pkt	67 Pcnt	48 Pkt
1762314925	13.32 Volt	1170 Pkt	260 Pkt	66 Pcnt	43 Pkt
1762314322	13.32 Volt	1200 Pkt	270 Pkt	67 Pcnt	41 Pkt
1762313722	13.32 Volt	1210 Pkt	270 Pkt	67 Pcnt	36 Pkt
1762313121	13.32 Volt	1220 Pkt	280 Pkt	68 Pcnt	62 Pkt
1762312522	13.32 Volt	1220 Pkt	280 Pkt	67 Pcnt	32 Pkt
1762311920	13.32 Volt	1230 Pkt	290 Pkt	67 Pcnt	50 Pkt
1762311319	13.32 Volt	1250 Pkt	290 Pkt	68 Pcnt	55 Pkt
1762310719	13.32 Volt	1200 Pkt	290 Pkt	67 Pcnt	35 Pkt
1762310118	13.32 Volt	1170 Pkt	300 Pkt	66 Pcnt	50 Pkt
1762309518	13.32 Volt	1120 Pkt	290 Pkt	64 Pcnt	56 Pkt
1762308917	13.32 Volt	1080 Pkt	280 Pkt	63 Pcnt	45 Pkt
1762308317	13.32 Volt	1050 Pkt	270 Pkt	62 Pcnt	55 Pkt
1762307716	13.32 Volt	1030 Pkt	260 Pkt	61 Pcnt	53 Pkt
1762307116	13.32 Volt	1020 Pkt	250 Pkt	61 Pcnt	48 Pkt
1762306515	13.32 Volt	990 Pkt	240 Pkt	61 Pcnt	39 Pkt
1762305915	13.32 Volt	990 Pkt	240 Pkt	60 Pcnt	44 Pkt
1762305315	13.32 Volt	980 Pkt	230 Pkt	59 Pcnt	31 Pkt

*Used Equation Coefficients:

Vin: 0, 0.074, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Dg10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)