This is the latest recevied telemetry packets stored in our database for station/object OE5ERN-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RX 1h* | RX 10m* | EF 1h* | Total* | Dg 1h* |
|---|---|---|---|---|---|
| 1754146660 | 0 Pkt | 0 Pkt | 0 Pcnt | 5 Pcnt | 0 Pkt |
| 1754146060 | 0 Pkt | 0 Pkt | 0 Pcnt | 5 Pcnt | 0 Pkt |
| 1754145459 | 0 Pkt | 0 Pkt | 0 Pcnt | 5 Pcnt | 0 Pkt |
| 1754144858 | 0 Pkt | 0 Pkt | 0 Pcnt | 5 Pcnt | 0 Pkt |
| 1754144258 | 0 Pkt | 0 Pkt | 0 Pcnt | 5 Pcnt | 0 Pkt |
| 1754143657 | 0 Pkt | 0 Pkt | 0 Pcnt | 5 Pcnt | 0 Pkt |
| 1754143057 | 0 Pkt | 0 Pkt | 100 Pcnt | 5 Pcnt | 0 Pkt |
| 1754142456 | 0 Pkt | 0 Pkt | 100 Pcnt | 5 Pcnt | 0 Pkt |
| 1754141855 | 0 Pkt | 0 Pkt | 100 Pcnt | 5 Pcnt | 0 Pkt |
| 1754141255 | 0 Pkt | 0 Pkt | 100 Pcnt | 5 Pcnt | 0 Pkt |
| 1754140654 | 0 Pkt | 0 Pkt | 100 Pcnt | 5 Pcnt | 0 Pkt |
| 1754140054 | 0 Pkt | 0 Pkt | 100 Pcnt | 5 Pcnt | 0 Pkt |
| 1754139453 | 0 Pkt | 0 Pkt | 100 Pcnt | 5 Pcnt | 0 Pkt |
| 1754138852 | 0 Pkt | 0 Pkt | 100 Pcnt | 5 Pcnt | 0 Pkt |
| 1754138252 | 0 Pkt | 0 Pkt | 100 Pcnt | 5 Pcnt | 0 Pkt |
| 1754137651 | 0 Pkt | 0 Pkt | 100 Pcnt | 5 Pcnt | 0 Pkt |
| 1754137051 | 0 Pkt | 0 Pkt | 100 Pcnt | 5 Pcnt | 0 Pkt |
| 1754136450 | 0 Pkt | 0 Pkt | 0 Pcnt | 5 Pcnt | 0 Pkt |
| 1754135850 | 0 Pkt | 0 Pkt | 0 Pcnt | 5 Pcnt | 0 Pkt |
| 1754135249 | 0 Pkt | 0 Pkt | 0 Pcnt | 5 Pcnt | 0 Pkt |
| 1754134648 | 0 Pkt | 0 Pkt | 0 Pcnt | 5 Pcnt | 0 Pkt |
| 1754134048 | 0 Pkt | 0 Pkt | 0 Pcnt | 5 Pcnt | 0 Pkt |
| 1754133447 | 0 Pkt | 0 Pkt | 0 Pcnt | 5 Pcnt | 0 Pkt |
| 1754132847 | 0 Pkt | 0 Pkt | 0 Pcnt | 5 Pcnt | 0 Pkt |
| 1754132246 | 0 Pkt | 0 Pkt | 0 Pcnt | 5 Pcnt | 0 Pkt |
*Used Equation Coefficients:
RX 1h: 0, 10, 0
RX 10m: 0, 1, 0
EF 1h: 0, 1, 0
Total: 0, 1, 0
Dg 1h: 0, 10, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)