This is the latest recevied telemetry packets stored in our database for station/object VK6KCH-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | 30m_APRS* | Uptime* | CPU_Temp* | JT9_Processes* | Swap* |
|---|---|---|---|---|---|
| 1792138222 | 0 pkts_in_hr | 4 hours | 78.33 degC | 0 | 216 MiB |
| 1792137909 | 0 pkts_in_hr | 4 hours | 75.33 degC | 2 | 216 MiB |
| 1792137611 | 0 pkts_in_hr | 4 hours | 78 degC | 0 | 200 MiB |
| 1792137311 | 0 pkts_in_hr | 4 hours | 81.67 degC | 2 | 200 MiB |
| 1792137009 | 0 pkts_in_hr | 4 hours | 75.33 degC | 0 | 200 MiB |
| 1792136726 | 0 pkts_in_hr | 4 hours | 77.33 degC | 2 | 200 MiB |
| 1792136426 | 0 pkts_in_hr | 4 hours | 79.67 degC | 0 | 200 MiB |
| 1792136109 | 0 pkts_in_hr | 4 hours | 77.33 degC | 2 | 200 MiB |
| 1792135810 | 0 pkts_in_hr | 3 hours | 69.33 degC | 0 | 200 MiB |
| 1792135510 | 0 pkts_in_hr | 3 hours | 77.33 degC | 2 | 200 MiB |
| 1792135211 | 0 pkts_in_hr | 3 hours | 76.33 degC | 0 | 200 MiB |
| 1792134920 | 0 pkts_in_hr | 3 hours | 77.33 degC | 2 | 200 MiB |
| 1792134620 | 0 pkts_in_hr | 3 hours | 76.67 degC | 4 | 200 MiB |
| 1792134310 | 0 pkts_in_hr | 3 hours | 74 degC | 2 | 200 MiB |
| 1792134009 | 0 pkts_in_hr | 3 hours | 68.67 degC | 0 | 200 MiB |
| 1792133711 | 0 pkts_in_hr | 3 hours | 75.67 degC | 2 | 200 MiB |
| 1792133410 | 0 pkts_in_hr | 3 hours | 76.33 degC | 0 | 200 MiB |
| 1792133120 | 0 pkts_in_hr | 3 hours | 74 degC | 2 | 200 MiB |
| 1792132819 | 0 pkts_in_hr | 3 hours | 74 degC | 2 | 200 MiB |
| 1792132509 | 0 pkts_in_hr | 3 hours | 71 degC | 2 | 200 MiB |
| 1792132209 | 0 pkts_in_hr | 2 hours | 67.67 degC | 0 | 200 MiB |
| 1792131910 | 0 pkts_in_hr | 2 hours | 75.67 degC | 2 | 200 MiB |
*Used Equation Coefficients:
30m_APRS: 0, 1, 0
Uptime: 0, 1, 0
CPU_Temp: 0, 0.333333, 0
JT9_Processes: 0, 1, 0
Swap: 0, 4, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)