This is the latest recevied telemetry packets stored in our database for station/object CE3SUR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1794902494 | 5 | 21.8 C | 4.23 V | 560 M | 0 |
| 1794898869 | 8 | 22.1 C | 4.23 V | 500 M | 0 |
| 1794894669 | 8 | 22.3 C | 4.23 V | 500 M | 0 |
| 1794891576 | 8 | 22.5 C | 4.23 V | 500 M | 0 |
| 1794887479 | 7 | 23 C | 4.23 V | 550 M | 0 |
| 1794883408 | 7 | 23.6 C | 4.22 V | 490 M | 0 |
| 1794879233 | 6 | 24.6 C | 4.23 V | 540 M | 0 |
| 1794872608 | 4 | 26.6 C | 4.22 V | 490 M | 0 |
| 1794868560 | 7 | 28.1 C | 4.22 V | 550 M | 0 |
| 1794865246 | 6 | 29.2 C | 4.22 V | 550 M | 0 |
| 1794861599 | 7 | 30.1 C | 4.22 V | 520 M | 0 |
| 1794857399 | 6 | 30.7 C | 4.23 V | 510 M | 0 |
| 1794853199 | 7 | 30 C | 4.22 V | 500 M | 0 |
| 1794848999 | 7 | 30.9 C | 4.22 V | 470 M | 0 |
| 1794840503 | 6 | 27.6 C | 4.22 V | 510 M | 0 |
| 1794840301 | 8 | 27.4 C | 4.22 V | 510 M | 0 |
| 1794839433 | 8 | 24.1 C | 4.16 V | 520 M | 0 |
| 1794838766 | 6 | 23.3 C | 4.22 V | 550 M | 0 |
| 1794838323 | 6 | 22.6 C | 4.22 V | 490 M | 0 |
| 1794834998 | 8 | 22 C | 4.23 V | 500 M | 0 |
| 1794826903 | 7 | 21.5 C | 4.23 V | 530 M | 0 |
| 1794823506 | 8 | 21.6 C | 4.23 V | 500 M | 0 |
| 1794820135 | 8 | 21.6 C | 4.23 V | 490 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)