APRS Track Direct

My position About ☰

reset

HS5WIW Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5WIW. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RF->INET*	INET->RF*	Repeater*	AllCount*	AllDrop*
1836274501	0 Pkts	0 Pkts	0 Pkts	11 Pkts	0 Pkts
1836274351	0 Pkts	0 Pkts	0 Pkts	20 Pkts	0 Pkts
1836273901	0 Pkts	0 Pkts	0 Pkts	14 Pkts	0 Pkts
1762318884	0 Pkts	0 Pkts	0 Pkts	84 Pkts	0 Pkts
1762318284	0 Pkts	0 Pkts	0 Pkts	77 Pkts	0 Pkts
1762317684	0 Pkts	0 Pkts	0 Pkts	64 Pkts	0 Pkts
1762317084	0 Pkts	0 Pkts	0 Pkts	68 Pkts	0 Pkts
1762316484	0 Pkts	0 Pkts	0 Pkts	27 Pkts	0 Pkts
1762315884	0 Pkts	0 Pkts	0 Pkts	36 Pkts	0 Pkts
1762315284	0 Pkts	0 Pkts	0 Pkts	27 Pkts	0 Pkts
1762314684	0 Pkts	0 Pkts	0 Pkts	31 Pkts	0 Pkts
1762314084	0 Pkts	0 Pkts	0 Pkts	28 Pkts	0 Pkts
1762313484	0 Pkts	0 Pkts	0 Pkts	31 Pkts	0 Pkts
1762312884	0 Pkts	0 Pkts	0 Pkts	31 Pkts	0 Pkts
1762312284	0 Pkts	0 Pkts	0 Pkts	31 Pkts	0 Pkts
1762311684	0 Pkts	0 Pkts	0 Pkts	34 Pkts	0 Pkts
1762311084	0 Pkts	0 Pkts	0 Pkts	35 Pkts	0 Pkts
1762310484	0 Pkts	0 Pkts	0 Pkts	30 Pkts	0 Pkts
1762309884	0 Pkts	0 Pkts	0 Pkts	55 Pkts	0 Pkts
1762309284	0 Pkts	0 Pkts	0 Pkts	51 Pkts	0 Pkts
1762308684	0 Pkts	0 Pkts	0 Pkts	42 Pkts	0 Pkts
1762308084	0 Pkts	0 Pkts	0 Pkts	37 Pkts	0 Pkts
1762307484	0 Pkts	0 Pkts	0 Pkts	56 Pkts	0 Pkts
1762306884	0 Pkts	0 Pkts	0 Pkts	29 Pkts	0 Pkts
1762306284	0 Pkts	0 Pkts	0 Pkts	25 Pkts	0 Pkts

*Used Equation Coefficients:

RF->INET: 0, 1, 0

INET->RF: 0, 1, 0

Repeater: 0, 1, 0

AllCount: 0, 1, 0

AllDrop: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)