APRS Track Direct

My position About ☰

reset

VK4RPR-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK4RPR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1836274271	13.58 Volt	360 Pkt	90 Pkt	98 Pcnt
1836274121	13.58 Volt	400 Pkt	110 Pkt	97 Pcnt
1766250254	13.58 Volt	640 Pkt	130 Pkt	72 Pcnt
1766249662	13.58 Volt	620 Pkt	130 Pkt	73 Pcnt
1766249054	13.58 Volt	620 Pkt	120 Pkt	74 Pcnt
1766248454	13.58 Volt	620 Pkt	130 Pkt	77 Pcnt
1766247854	13.5 Volt	610 Pkt	120 Pkt	75 Pcnt
1766247255	13.58 Volt	570 Pkt	110 Pkt	74 Pcnt
1766246654	13.58 Volt	570 Pkt	110 Pkt	75 Pcnt
1766246054	13.58 Volt	600 Pkt	120 Pkt	76 Pcnt
1766245454	13.58 Volt	580 Pkt	120 Pkt	75 Pcnt
1766244854	13.58 Volt	550 Pkt	110 Pkt	75 Pcnt
1766244254	13.58 Volt	540 Pkt	110 Pkt	78 Pcnt
1766243656	13.58 Volt	500 Pkt	110 Pkt	78 Pcnt
1766243054	13.58 Volt	470 Pkt	100 Pkt	76 Pcnt
1766242454	13.58 Volt	460 Pkt	90 Pkt	77 Pcnt
1766241854	13.58 Volt	430 Pkt	90 Pkt	77 Pcnt
1766241254	13.58 Volt	410 Pkt	90 Pkt	76 Pcnt
1766240654	13.5 Volt	420 Pkt	90 Pkt	72 Pcnt
1766240057	13.58 Volt	400 Pkt	80 Pkt	70 Pcnt
1766239454	13.58 Volt	440 Pkt	90 Pkt	70 Pcnt
1766238854	13.58 Volt	460 Pkt	100 Pkt	66 Pcnt
1766238254	13.58 Volt	450 Pkt	100 Pkt	65 Pcnt
1766237654	13.58 Volt	450 Pkt	90 Pkt	64 Pcnt
1766237054	13.58 Volt	440 Pkt	90 Pkt	65 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)