This is the latest recevied telemetry packets stored in our database for station/object IZ1OSY-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Rx* | TxDigipeater* | Vbatt* | Vext* | Value5* |
|---|---|---|---|---|---|
| 1754162274 | 0 Pkt/10m | 0 Pkt/10m | 4.78 Volt | 0.3 Volt | -6.35 Ampere |
| 1754161674 | 1 Pkt/10m | 0 Pkt/10m | 4.78 Volt | 0.3 Volt | -6.35 Ampere |
| 1754161073 | 0 Pkt/10m | 0 Pkt/10m | 4.8 Volt | 0.3 Volt | -6.35 Ampere |
| 1754160465 | 0 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0.3 Volt | -6.35 Ampere |
| 1754159864 | 0 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0.4 Volt | -6.35 Ampere |
| 1754159264 | 0 Pkt/10m | 0 Pkt/10m | 4.8 Volt | 0.4 Volt | -6.35 Ampere |
| 1754158655 | 0 Pkt/10m | 0 Pkt/10m | 4.8 Volt | 0.3 Volt | -6.35 Ampere |
| 1754156246 | 0 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0.4 Volt | -6.35 Ampere |
| 1754155646 | 1 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0.4 Volt | -6.35 Ampere |
| 1754155038 | 0 Pkt/10m | 0 Pkt/10m | 4.8 Volt | 0.4 Volt | -6.35 Ampere |
| 1754154437 | 0 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0.4 Volt | -6.35 Ampere |
| 1754153837 | 0 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0.4 Volt | -6.35 Ampere |
| 1754153229 | 1 Pkt/10m | 0 Pkt/10m | 4.8 Volt | 0.3 Volt | -6.35 Ampere |
| 1754152628 | 0 Pkt/10m | 0 Pkt/10m | 4.86 Volt | 0.4 Volt | -6.35 Ampere |
| 1754152028 | 0 Pkt/10m | 0 Pkt/10m | 4.8 Volt | 0.5 Volt | -6.35 Ampere |
| 1754151420 | 0 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0.4 Volt | -6.35 Ampere |
| 1754150820 | 0 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0.3 Volt | -6.35 Ampere |
| 1754150219 | 0 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0.3 Volt | -6.35 Ampere |
| 1754149611 | 0 Pkt/10m | 0 Pkt/10m | 4.8 Volt | 0.4 Volt | -6.35 Ampere |
| 1754149011 | 0 Pkt/10m | 0 Pkt/10m | 4.8 Volt | 0.3 Volt | -6.35 Ampere |
| 1754148410 | 0 Pkt/10m | 0 Pkt/10m | 4.8 Volt | 0.4 Volt | -6.35 Ampere |
| 1754147802 | 0 Pkt/10m | 0 Pkt/10m | 4.8 Volt | 0.3 Volt | -6.35 Ampere |
| 1754147202 | 1 Pkt/10m | 0 Pkt/10m | 4.8 Volt | 0.3 Volt | -6.35 Ampere |
| 1754146601 | 0 Pkt/10m | 0 Pkt/10m | 4.82 Volt | 0.4 Volt | -6.35 Ampere |
| 1754145993 | 1 Pkt/10m | 0 Pkt/10m | 4.86 Volt | 0.4 Volt | -6.35 Ampere |
*Used Equation Coefficients:
Rx: 0, 1, 0
TxDigipeater: 0, 1, 0
Vbatt: 0, 0.0196, 0
Vext: 0, 0.1, 0
Value5: 0, 0.05, -6.35
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)