APRS Track Direct

My position About ☰

reset

BR9UN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BR9UN. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*	Value5*
1836274787	0.55 Load	56 DegC	1246 Mb	934 Pkt	793 Pkt
1836274487	0.55 Load	56 DegC	1246 Mb	968 Pkt	790 Pkt
1836274337	0.59 Load	56 DegC	1247 Mb	903 Pkt	770 Pkt
1836274187	0.55 Load	56 DegC	1244 Mb	905 Pkt	775 Pkt
1836273887	0.54 Load	56 DegC	1244 Mb	947 Pkt	795 Pkt
1766075434	0.56 Load	50 DegC	1150 Mb	1046 Pkt	816 Pkt
1766075135	0.52 Load	50 DegC	1155 Mb	948 Pkt	697 Pkt
1766074834	0.54 Load	50 DegC	1149 Mb	1036 Pkt	798 Pkt
1766074535	0.6 Load	50 DegC	1153 Mb	990 Pkt	766 Pkt
1766074234	0.57 Load	51 DegC	1158 Mb	1065 Pkt	825 Pkt
1766073935	0.6 Load	50 DegC	1159 Mb	950 Pkt	756 Pkt
1766073634	0.62 Load	53 DegC	1119 Mb	1040 Pkt	819 Pkt
1766073334	0.53 Load	51 DegC	1158 Mb	980 Pkt	739 Pkt
1766073034	0.54 Load	50 DegC	1155 Mb	1033 Pkt	778 Pkt
1766072734	0.55 Load	51 DegC	1159 Mb	1049 Pkt	740 Pkt
1766072434	0.55 Load	50 DegC	1161 Mb	1090 Pkt	819 Pkt
1766072134	0.6 Load	50 DegC	1152 Mb	1021 Pkt	770 Pkt
1766071834	0.55 Load	50 DegC	1158 Mb	1091 Pkt	782 Pkt
1766071535	0.5 Load	50 DegC	1152 Mb	1050 Pkt	769 Pkt
1766071234	0.54 Load	50 DegC	1154 Mb	1134 Pkt	835 Pkt
1766070935	0.55 Load	50 DegC	1156 Mb	1065 Pkt	747 Pkt
1766070634	0.59 Load	50 DegC	1149 Mb	1074 Pkt	777 Pkt
1766070335	0.55 Load	50 DegC	1156 Mb	1029 Pkt	786 Pkt
1766070034	0.54 Load	50 DegC	1151 Mb	1056 Pkt	808 Pkt
1766069735	0.56 Load	50 DegC	1154 Mb	1010 Pkt	729 Pkt

*Used Equation Coefficients:

Value1: 0, 0.001, 0

Value2: 0, 0.001, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)