This is the latest recevied telemetry packets stored in our database for station/object AE5PL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Load1* | Load5* | Ld15* | Value5* |
|---|---|---|---|---|---|
| 1786726642 | 46 deg.C | 1 tot.% | 2 tot.% | 2 tot.% | 0 |
| 1786726042 | 45 deg.C | 3 tot.% | 2 tot.% | 2 tot.% | 0 |
| 1786725442 | 45 deg.C | 2 tot.% | 1 tot.% | 1 tot.% | 0 |
| 1786724842 | 45 deg.C | 2 tot.% | 2 tot.% | 1 tot.% | 0 |
| 1786724242 | 45 deg.C | 3 tot.% | 1 tot.% | 1 tot.% | 0 |
| 1786723642 | 45 deg.C | 7 tot.% | 2 tot.% | 2 tot.% | 0 |
| 1786723042 | 44 deg.C | 0 tot.% | 1 tot.% | 1 tot.% | 0 |
| 1786722442 | 45 deg.C | 0 tot.% | 2 tot.% | 2 tot.% | 0 |
| 1786721842 | 45 deg.C | 2 tot.% | 2 tot.% | 2 tot.% | 0 |
| 1786721242 | 44 deg.C | 2 tot.% | 1 tot.% | 1 tot.% | 0 |
| 1786720642 | 45 deg.C | 0 tot.% | 1 tot.% | 2 tot.% | 0 |
| 1786720042 | 44 deg.C | 2 tot.% | 3 tot.% | 2 tot.% | 0 |
| 1786719442 | 45 deg.C | 0 tot.% | 1 tot.% | 1 tot.% | 0 |
| 1786718842 | 45 deg.C | 5 tot.% | 2 tot.% | 1 tot.% | 0 |
| 1786718242 | 45 deg.C | 0 tot.% | 1 tot.% | 1 tot.% | 0 |
| 1786717642 | 45 deg.C | 0 tot.% | 0 tot.% | 1 tot.% | 0 |
| 1786717042 | 45 deg.C | 1 tot.% | 2 tot.% | 2 tot.% | 0 |
| 1786716442 | 45 deg.C | 1 tot.% | 2 tot.% | 2 tot.% | 0 |
| 1786715842 | 44 deg.C | 3 tot.% | 2 tot.% | 2 tot.% | 0 |
| 1786715242 | 45 deg.C | 0 tot.% | 1 tot.% | 1 tot.% | 0 |
| 1786714642 | 44 deg.C | 1 tot.% | 1 tot.% | 1 tot.% | 0 |
| 1786714042 | 44 deg.C | 1 tot.% | 1 tot.% | 1 tot.% | 0 |
| 1786713442 | 45 deg.C | 1 tot.% | 1 tot.% | 1 tot.% | 0 |
| 1786712842 | 45 deg.C | 0 tot.% | 1 tot.% | 1 tot.% | 0 |
| 1786712242 | 45 deg.C | 0 tot.% | 1 tot.% | 1 tot.% | 0 |
*Used Equation Coefficients:
Temp: 0, 1, 0
Load1: 0, 1, 0
Load5: 0, 1, 0
Ld15: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)