This is the latest recevied telemetry packets stored in our database for station/object W4KRL-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Vcell* | RSSI* | Light* | Awake* | Value5* |
|---|---|---|---|---|---|
| 1794906009 | 3.99 Vdc | -84 dBm | 0 lux | 1.08 secs | 0 |
| 1794905408 | 3.98 Vdc | -85 dBm | 0 lux | 1.43 secs | 0 |
| 1794904807 | 3.98 Vdc | -85 dBm | 0 lux | 1.23 secs | 0 |
| 1794904205 | 3.98 Vdc | -85 dBm | 0 lux | 0.98 secs | 0 |
| 1794903605 | 3.99 Vdc | -84 dBm | 0 lux | 1.38 secs | 0 |
| 1794903004 | 3.99 Vdc | -86 dBm | 0 lux | 1.15 secs | 0 |
| 1794902403 | 3.99 Vdc | -85 dBm | 0 lux | 1.03 secs | 0 |
| 1794901802 | 3.99 Vdc | -85 dBm | 0 lux | 1.33 secs | 0 |
| 1794901201 | 4 Vdc | -86 dBm | 0 lux | 1.43 secs | 0 |
| 1794900600 | 4 Vdc | -85 dBm | 0 lux | 1.25 secs | 0 |
| 1794899999 | 4 Vdc | -84 dBm | 0 lux | 1.13 secs | 0 |
| 1794899398 | 4 Vdc | -84 dBm | 0 lux | 1.35 secs | 0 |
| 1794898798 | 4 Vdc | -84 dBm | 0 lux | 1.15 secs | 0 |
| 1794898197 | 4.01 Vdc | -85 dBm | 0 lux | 1.08 secs | 0 |
| 1794897597 | 4.01 Vdc | -85 dBm | 0 lux | 1.13 secs | 0 |
| 1794896995 | 4.01 Vdc | -84 dBm | 0 lux | 1.08 secs | 0 |
| 1794896394 | 4.01 Vdc | -85 dBm | 0 lux | 1.65 secs | 0 |
| 1794895793 | 4.01 Vdc | -85 dBm | 0 lux | 1.15 secs | 0 |
| 1794895192 | 4.01 Vdc | -84 dBm | 0 lux | 1.25 secs | 0 |
| 1794894591 | 4.02 Vdc | -85 dBm | 0 lux | 1.2 secs | 0 |
*Used Equation Coefficients:
Vcell: 0, 0.0025, 2.5
RSSI: 0, -1, 0
Light: 0.1218, 0, 0
Awake: 0, 0.025, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)