This is the latest recevied telemetry packets stored in our database for station/object OE6POD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1758212546 | 947.5 hPa | 24 C deg | 32.3 % | 1022.9 hPa | 18.4 C deg |
| 1758210735 | 947.3 hPa | 24 C deg | 32.1 % | 1022.8 hPa | 18.4 C deg |
| 1758208908 | 947.3 hPa | 24.1 C deg | 31.9 % | 1022.7 hPa | 18.4 C deg |
| 1758207088 | 947.2 hPa | 23.7 C deg | 32 % | 1022.7 hPa | 18.4 C deg |
| 1758205269 | 947.3 hPa | 23.7 C deg | 32 % | 1022.8 hPa | 18.4 C deg |
| 1758203454 | 947.4 hPa | 23.7 C deg | 31.7 % | 1022.9 hPa | 18.4 C deg |
| 1758201639 | 947.4 hPa | 23.5 C deg | 31.9 % | 1023 hPa | 18.4 C deg |
| 1758199824 | 947.6 hPa | 23.3 C deg | 31.4 % | 1023.2 hPa | 18.4 C deg |
| 1758198006 | 947.9 hPa | 23 C deg | 31.3 % | 1023.6 hPa | 18.4 C deg |
| 1758196191 | 948 hPa | 23 C deg | 31.1 % | 1023.8 hPa | 18.4 C deg |
| 1758194376 | 948.3 hPa | 22.9 C deg | 30.9 % | 1024.1 hPa | 18.4 C deg |
| 1758192568 | 948.6 hPa | 22.8 C deg | 30.8 % | 1024.4 hPa | 18.4 C deg |
| 1758188934 | 949.2 hPa | 22 C deg | 30.7 % | 1025.2 hPa | 18.4 C deg |
| 1758187112 | 949.3 hPa | 22.1 C deg | 30.3 % | 1025.4 hPa | 18.4 C deg |
| 1758185297 | 949.4 hPa | 22.3 C deg | 30.3 % | 1025.5 hPa | 18.4 C deg |
| 1758183483 | 949.5 hPa | 22.7 C deg | 30.2 % | 1025.4 hPa | 18.4 C deg |
| 1758181666 | 949.3 hPa | 22.5 C deg | 30.3 % | 1025.3 hPa | 18.4 C deg |
| 1758179856 | 949.2 hPa | 22.6 C deg | 30.2 % | 1025.1 hPa | 18.4 C deg |
| 1758178042 | 949.3 hPa | 23 C deg | 30.4 % | 1025.1 hPa | 18.4 C deg |
| 1758176221 | 949.3 hPa | 23 C deg | 30.7 % | 1025.1 hPa | 18.4 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)